Table of Contents
Advertisement
1 - 4
DS9208-1D Product Reference Guide
Configuring the Digital Scanner
To configure the digital scanner use the bar codes included in this manual, or use the 123Scan
program. See
Chapter 4, User Preferences & Miscellaneous Options
information about programming the digital scanner using bar code menus. See
information on using this configuration program. Also see each host-specific chapter to set up connection to a
specific host type.
Mounting the Digital Scanner
Wall Mount Bracket
An optional wall mount bracket is available for mounting the scanner to a wall or other vertical surface. For a
template that facilitates screw placement, see
To mount the DS9208-1D:
Place the bracket in its desired location on the wall, and insert two #8 screws through each screw hole in
1.
the bracket.
NOTE Select a screw type and length appropriate for the wall material.
Installing the Wall Mount Bracket
Figure 1-3
Tighten the screws to secure the bracket to the wall.
2.
and
Mounting Templates on page
2
configuration
Chapter 9, Symbologies
for
Chapter 10, 123Scan2
1-8.
for
Advertisement
Table of Contents
