Hardware Installation - For Access Point Mode - D-Link DHP-1565 User Manual

Section 2 - Installation

Hardware Installation - For Access Point Mode

ROOM A
TV
Internet
DHP-1565 (Router Mode)
Existing Wall Wiring
ROOM B
DHP-1565 (AP Mode)
D-Link DHP-1565 User Manual
Install your device
Game Console Plug the power cord of the DHP-1565 into an AC wall outlet close to your Computer
as seen in Room B. Confirm the DHP-1565 is in AP mode and turn it on by pushing
the on/off switch located on the back of the unit. Wait about 30 seconds for the
DHP-1565 to boot.
Connect one end of the supplied CAT5 Ethernet cable to the Ethernet port on the
DHP-1565 and the other end to the Ethernet port on your computer.
Computer
13