Off Timer <Others>-<Off Timer; Adjustment Lock Function - Eizo RadiForce RX320 User Manual

-. Off Timer <Others>-<Off Timer>
The off timer function causes the monitor to turn off automatically after a predetermined
amount of time has lapsed. This function was created to reduce the afterimages particular
to LCD monitors, which appear when the screen is left on for long periods without use.
[How to set]
1. Select <Off Timer> in the ScreenManager <Others> menu.
2. Select "Enable" and touch the Right and Left directing switches to adjust the operating
time (1 to 23 hours).
[Off timer system]
PC
Operating time (1H - 23H)
Last 15 min. in operating time
Operating time expired
*1
By touching the power switch on the control panel during the Advance Notice period, the
operating time can be reset to 90 minutes. Resetting can be performed an unlimited number of
times.
[Power Resumption Procedure]
Touch the power switch to return to a normal screen.
NOTE
• The off timer function works while the PowerManager is active, but there is no advance
notice before the monitor's power is turned off.

-. Adjustment Lock Function

Use the "Adjustment Lock" function to prevent any accidental changes.
Locked functions
Unlocked function
[How to lock]
1. Turn off the monitor power by touching the power switch.
2. Touch the power switch while touching the enter switch.
[How To unlock]
1. Turn off the monitor power by touching the power switch.
2. Touch the power switch while touching the enter switch, and then turn on the monitor
again. The adjustment lock is released.
Monitor
Operational
1
Advance Notice *
Power off
• Display, adjustment, and setting of the ScreenManager
• Brightness adjustments to the CAL Switch mode
• Selection of the CAL Switch mode with the mode switch
3. Adjustment and Settings
Power Indicator
Green
Flashing green
Flashing orange slowly