Removing A Headlamp; Changing A Bulb - Ford Kuga Owner's Manual

5. Install in the reverse order.
Note: Make sure that the wiper blade locks
into place.
Replace wiper blades at least once per
year for optimum performance.
Poor wiper quality can be improved by
cleaning the wiper blades and the
windshield.

REMOVING A HEADLAMP

1. Make sure the lighting control is in the
off position and open the hood.
2. Remove the three screws from the
headlamp assembly.
3. Carefully pull the headlamp assembly
as far as possible toward the front of
your vehicle to disengage it from the
lower fixing point.
4. Carefully lift the outer side of the
headlamp and remove it.
5. Disconnect the electrical connector.

CHANGING A BULB

WARNINGS
Switch the lamps and the ignition off.
Let the bulb cool down before
removing it.
Kuga (CBS) Vehicles Built From: 10-03-2014, Vehicles Built Up To: 31-12-2014, CG3585en enGBR, Edition date: 02/2014, None
Maintenance
Note: Only fit bulbs of the correct
specification.
Note: The following instructions describe
how to remove the bulbs. Fit replacements
in the reverse order unless otherwise stated.
Headlamp
Type 1
A
B
Headlamp High Beam
1. Remove the cover.
2. Disconnect the electrical connector.
3. Turn the bulb counterclockwise and
pull it straight out to remove it.
Note: Do not touch the glass of the bulb.
191
Low beam headlamp
High beam and daytime running
lamp