Page 3
Thank You For purchasing the Kid Trax Police Car. With the Police Car your child will have fun and enjoyment for years to come. Please call us at Kid Trax Toys Consumer Relations at 877-741-6154 with comments or questions. Customer Service hours are 8AM - 5PM Monday thru Friday CST.
Safety WARNING! The following safety hazards may result in serious injury or death to the user of the Police Car: • This product contains small parts that are for adult assembly only. Keep small children away when assembling. Remove and dispose of all protective material and poly bags before assembly.
12V12AH Parts List: 1. Dashboard 15. M5 x 25 Screw (2) (included in Side Mirrors) 2. Steering Wheel 16. M4.2 x 20 Screw (18) (included in one package) 3. Car Seats (2) 17. M5 x 57 Screw 4. Rear Section (included in Steering Wheel) 5.
Assembly Charging the Battery - Warnings WARNING! The following safety hazards may result in serious injury or death to the user of the Police Car: • Use of a battery or charger other than the supplied Kid Trax Toys 12V rechargeable battery and charger may cause a fire or explosion.
Page 9
WARNING! • Contact or exposure to battery leakage (lead acid) may cause serious injury. If contact or exposure occurs immediately call your physician. If the chemical is on the skin or in the eyes, flush with cool water for 15 minutes. If the chemical was swallowed, immediately give the person water or milk.
Charging the Battery 1. Plug the charger connector into the battery connector on the battery. Only use the Kid Trax Toys 12V charger included with the Police Car (Input: AC 120V, 60Hz Output: DC 12V). 2. Plug the charger into a standard 120V wall outlet. Note: The charger may feel warm during charging.
Install the Front Grill 1. Remove the medium M5 x 30 screw which is attached to the front end connector. 2. Align the connector over the square metal tubing on the car body. Push the metal tubing together until the two pieces meet inside the connector.
Install the Rear Wheels (in clear poly bags) 1. Locate a rear wheel (marked “Rear” with gear-shaped protrusion). 2. Slide the wheel onto the axle with protrusion facing toward vehicle. 3. Fit the gear shaped protrusion into the gear box. 4.
Install the Front Wheels (in blue poly bags) 1. Slide a large washer onto the axle. Note: The Washer may already be on the axle. 2. Slide a wheel onto the axle with FRONT facing toward vehicle. 3. Slide a wheel cover onto the axle, fitting the three locating pins into the holes in the wheel.
Install the Left and Right Car Doors 1. Slide the bottom of the car door hinge into the car hinge pocket until the steel plate rests on the recessed area of the car body. 2. Align the holes of the steel plate with the screw holes on the recessed area on the car body.
Install the Dashboard Assembly 1. Plug the Megaphone into the megaphone port located underneath the Dashboard. 2. Attach the connector under the Dashboard to the connector on the car body, located at the top of the black, middle stripe. Note: The connector’s may have slipped inside the Dashboard assembly during shipment, if so, gently pull the connector out.
Page 16
3. Slide the Megaphone onto the bracket. 4. Open the car doors. 5. Slide the tabs on the front of the Dashboard assembly into the slots on the car body. Note: Be sure the connector wires are not separated, pinched or crimped. 6.
Install the Steering Rod and Steering Wheel 1. Place the vehicle on soft material that will protect it from scratching or damage. Carefully turn the vehicle onto its side. Note: It is helpful to have a second person assisting you with these steps.
Page 18
3. Attach the wiring harness connector from the Steering Wheel into the wiring harness connector in the Dashboard. 4. Remove M5 x 57 screw (part: #17) from the Steering Wheel. Insert the Steering Wheel onto the rod and slide it into the pocket on the Dashboard.
Install the Rear Section 1. Align the Rear Section over the four locators on the car body and lower the Rear Section into place. 2. Using the (7) M4.2 x 20 (part:#16) screws fasten the Rear Section to the car body. Do not over tighten the screws. Rear body Rear body locator...
Connect the Battery Important! Before using the Police Car for the first time the battery needs to be charged for a full 24 hours (see page 6 for battery charging instructions). 1. Fasten the Battery connector to the Main Harness. 2.
Install the Car Seats 1. Locate the bracket behind in the back of the car seat. 2. Align the car seat bracket with the car seat slot, and the T-lock with the car seat lock hole. Lower the seat into place. 3.
Install the Mirrors 1. Align the holes of the Mirror with the holes on the mirror hinge. 2. Insert a M5 x 25 screw (part:#15) through the mirror and mirror hinge holes. 3. Screw a small nut to the bottom of the screw. Do not over tighten. Install the Front Guard 1.
Important! Before using the Police Car for the first time the battery needs to be charged for a full 24 hours. Only an adult who has read and understands the safety warnings (see Assembly) should handle, charge or recharge of the battery. Read the Assembly and Maintenance sections before use of the vehicle.
Vehicle Controls 1. Power Switch: Turns the vehicle on and off. 2. Sound Effects: Pressing the button on the left side of the steering wheel will make a muscle car sound effects. Pressing the right side will make a police scanner sound effect. 3.
Maintenance General The vehicle should be checked for damage, missing or badly worn parts before use. • Check the tightness of the fasteners before each use. • Check the tightness of the wheel nuts. Use a flat head screwdriver to gently pry off the hub caps. Note: If the wheel nuts are not tight the wheels will not engage the forward gears and the vehicle will not run.
Re-Charge Interval and Time Important! • Damage to the battery may occur if it is allowed to drain completely. Do not allow the battery to drain completely. • Check the battery and charger (supply chord, connector) for wear and damage before charging. Do not charge the battery if damage has occurred.
Battery Replacement and Disposal The Kids Trax Toys 12V battery will eventually lose the ability to hold a charge. Depending on the amount of use, and varying conditions, the battery should operate for one to three years. Follow these steps to replace and dispose the battery: 1.
Battery Fuse The Kid Trax Toys 12V battery features a thermal fuse with a reset fuse that will automatically trip and cut all power to the vehicle if the motor, electric system or battery is overloaded. The fuse will reset and power will be restored after the unit is turned OFF for 5 Minutes and then turned ON again.
Troubleshooting Guide The following are examples of potential problems. Completely read through this manual and the troubleshooting guide table before calling Kid Trax Toys Consumer Relations. If you still need help resolving the problem please call 877-741-6154. Kid Trax Toys recommends that you take the vehicle to an authorized service center for periodic maintenance and service.
Page 30
Problem Possible Cause Remedy Vehicle does not Battery is under Check that the battery run very long charged connectors are firmly plugged into each other when recharging (see Battery: Recharge Interval and Time) Battery is old Replace battery (see Battery: Replacement and Disposal) Vehicle runs Battery low on...
Page 31
Problem Possible Cause Remedy Difficult shifting Attempting to shift Completely stop the from forward to while the vehicle is vehicle and shift (see Use: reverse or visa- in motion Manual Operation) versa Loud grinding or Motor or gears are Call Consumer Relations at 877-741-6154 for an clicking noises damaged...
Services, Repairs and Parts Do not return this product to the place of purchase. If your Police Car needs service, repairs or replacement parts, call: Kid Trax Toys Consumer Relations Hours: 8:00am – 5:00pm (CST) Monday - Friday Phone: 877-741-6154 Email: customerservice@kidtraxtoys.com Web: www.kidtraxtoys.com For service and repairs you will be directed to an authorized service...
FCC Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warranty One-Year Limited Warranty Six-Month Limited Warranty on Battery Pacific Cycle, Inc. (PC) warrants this product to the original retail purchaser as follows: The vehicle (except for the 12-volt battery) is warranted against defective materials or workmanship for one year from the date of original purchase.
Page 35
Limitation of Warranties and Warranty Terms Any implied warranties, including implied warranties of the merchantability and fitness for a particular purpose, shall be limited to the duration and terms of the express written warranty. Some states do not allow limitations as the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.
Need help?
Do you have a question about the Dodge Charger and is the answer not in the manual?
Questions and answers