MAXIMUM AND MINIMUM READINGS LOST COMMUNICATION TRANSMISSION COLLISION WWVB RADIO CONTROLLED TIME ATOMIC CLOCK Honeywell TIME AND CALENDAR DISPLAY MODES Long-Range Weather Forecaster MANUAL SETTINGS CLOCK ALARMS SNOOZE BACKLIGHT PRECAUTIONS TROUBLESHOOTING SPECIFICATIONS FCC STATEMENT DECLARATION OF CONFORMITY STANDARD WARRANTY INFORMATION (TE322ELW) USER MANUAL...
INTRODUCTION PRODUCT OVERVIEW MAIN UNIT Thank you for selecting the Honeywell Wireless Long-Range Weather Forecaster. This device combines precise time keeping with monitoring and FEATURES • New Double-Tool Design displaying the weather conditions from up to three remote locations. • Time automatically sets to the US Atomic Clock In this package you will find: •...
Page 3
FRONT/REAR VIEW day of the week • Activates clock’s manual programming mode F. DOWN ( ▼) button • Decreases the parameters • Activates manual remote channels search • Disables time alarms (W) and (S) and Ice Warning Alarm ALARM button •...
REMOTE SENSOR • Keeps the remote sensor on the wall FEATURES F. °C/ °F SWITCH • New double-tool design • Selects the temperature display in Celsius or Fahrenheit • Remote temperature transmission to the main unit via 433 MHz BEFORE YOU BEGIN frequency •...
• Install 2 batteries (UM-3 or “AA” size 1.5V) matching the polarity as 2. The effective operating range may be influenced by the surrounding building materials and how the receiver and transmitter are positioned. shown in the battery compartment. • Replace the battery compartment door. 3.
REMOTE AND INDOOR TEMPERATURE The main unit display shows forecasted (predicted) not current The remote temperature information line is located right below the weather conditions. The SUNNY icon indicates clear weather, even when forecast line of the main unit’s display. displayed during the night-time.
• Remove four (4) small screws from the back of the remote sensor with The WWVB tower icon on the unit’s display will flash indicating a radio signal small Phillips screwdriver, and open the battery compartment. reception from the WWVB station. If the tower icon is not fully lit, or if the time •...
the better reception. The atomic clock receiver is programmed that it will the week and temperature in Fahrenheit or Celsius • Press MODE for the last time to return to the time of day with seconds, continue to search for the atomic time signal daily for every hour between 1:00 am and 4:30 am.
BACKLIGHT • Press ALARM button again to confirm and the weekday alarm time will be set The backlight feature is enabled only after the time is set. • Set Single (S) day alarm if desired in the same manner To activate the backlight press the SNOOZE/LIGHT button once, and both – clock and weather station displays - will light up for five seconds.
TROUBLESHOOTING SPECIFICATIONS Check here before contacting customer service. Main Unit Indoor Temperature Proposed operating range: 23.0°F to 122.0°F (-5°C to +50°C) Issue Symptom Solution Temperature resolution: 0.2°F (0.1°C) Main unit US Atomic Time Place unit by the window and User-selectable (°F or °C) temperature display Weather Forecast in five large graphic icons: Sunny, Partly Cloudy, Cloudy, signal is not received keep it there overnight...
Product No.: TE322ELW equipment. Product Name: Honeywell Long-Range Weather Forecaster NOTE: This equipment had been tested and found to comply with the limits for Manufacturer: Hideki Electronics Ltd.
Meade Instruments Corp. reserves the right to repair or replace the product at our option. Copyright (2010) Meade Instruments Corp. All Rights Reserved. The Honeywell Trademark is used under license from Honeywell International Inc. Honeywell International Inc. makes no representations or warranties with respect to this product.