Samsung 430 Series User Manual page 8

Plug
&
Play (Initial Setup)
When you turn the 1V on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. To turn on
the 1V, press the POWERc; button.
~
Plug & Play is available only when the Source is set to TV.
~
To return to the previous step in the Plug
&
Play sequence, press the red button on your remote.
Press the ENTER G' button.
The channel search will start automatically. This can take up to 30 minutes.
For more information, refer to Channel
->
Auto Program in the e-Manual.
~
Press the ENTER G' button at any time to interrupt the memorization process.
Press the
~
or
~
button. Press the'" or T button to select Auto or Manual, and then
press ENTER G'.
~
If you selected Auto, you'll select the time zone where you live next, and then select
whether to turn DST (Daylight Savings Time) On or Off.
~
If you selected Manual, you'll use the number buttons or ...
or
T button to set the
date and time. Use the
~
or
~
button to move between entry fields.
POWER
~
Press the ... or T button to select Air or Cable, and then press ENTER G'. A check
appears on your selection. Select Next, and then press the ENTER G' button. You can
check both if you have both connected.
~
If you selected Cable, you'll go to the Cable System screen. Use the'" or T button
to select Digital or Analog, and then press ENTER G'. Use the'" or T button to select
the correct cable signal format - STD, HRC, or IRC - and then press ENTERG'.
Most cable systems use STD. Select the correct cable signal format for both the
Digital and Analog systems. When done, select Search, and the press ENTER G'.
Press the
~
or
~
button, and then press the'" or T button to select
a language. Press ENTER G' when done.
Press the
~ or ~
button to select, and then press the ENTER G'
button.
• Select the Home Use mode. Store Demo mode is for retail
environments.
Selecting and
memorizing channels
Enjoy your TV.
Selecting search
options for auto tuning
Setting the Clock
Mode
Selecting the OSD
Language
Selecting the usage
mode
If You Want to Reset Plug
&
Play...
~
MENUIIII
->
System
->
Plug
&
Play
->
ENTER G'
~
To change the TV's settings from Store Demo to Home Use when not in Plug &Play, press the volume button on the
TV. When you see the volume in the OSD, press and hold MENU for 5 sec.