Table of Contents
Advertisement
These capillary action test strips require
only 0.5 micro-liter (µl) of blood and provide
an end-fill sample application tip for easy
blood application. The ReliOn® Prime Blood
Glucose Monitoring System measures the
amount of glucose (sugar) in fresh capillary
whole blood. When a drop of blood is added
to the sample application tip, the sample is
drawn into the test strip reaction site. The
glucose in the blood reacts with the enzyme
on the test strip. This reaction produces
a current, proportional to the amount of
glucose in the blood. The meter detects the
current and converts it into a blood glucose
reading.
12
ReliOn® Prime TEST STRIPS
TEST STRIP
Reaction
Site
Sample Application Tip
(apply blood to end of test strip
and capillary action will pull blood
to reaction site quickly and easily)
Test Strip
Contact Bars
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Prime and is the answer not in the manual?
Questions and answers
everytime I turn on my meter I get an E04 message
The E04 message on the ReliOn Prime meter, accompanied by a flashing battery icon, indicates that the battery is low and needs to be replaced.
This answer is automatically generated
What if it reads lo
The ReliOn Prime meter displays "LO" when the blood glucose level is extremely low, below the measurable range of the device. This indicates severe hypoglycemia, which requires immediate attention. If this occurs, the user should repeat the test and consult a healthcare professional if the result remains the same.
This answer is automatically generated
How do I delete old results from memory?
There is no clear information on how to delete old results from the ReliOn Prime memory. However, you may be able to mark a test result with an "!" to exclude it from average calculations. Check the owner's manual for instructions on marking results.
This answer is automatically generated
How to reset or clear memory