Table of Contents
Advertisement
9. AUX
9.1 Start listening
Preparation:
• Select "ON" for "BUILT-IN AUX". See
<3.3 Changing
the initial settings> (page 11)
1
Open the cover.
2
Connect a portable audio player
(commercially available).
(b)
(a)
1
2
(a) 3.5 mm stereo mini plug audio cable
(commercially available)
(b) Portable audio device (commercially available)
3
Press [8SRC] to select
AUX
.
4
Turn on the portable audio player and start
playback.
Display Selection
Press [SCRL DISP] repeatedly to select an
information.
SOURCE NAME ; CLOCK
26
|
KDC-X797/ KDC-BT755HD
9.2 Set the AUX name
You can set the AUX name to be displayed when
switching to the AUX source.
1
Press the volume knob to enter Function
mode.
"FUNCTION" appears.
2
SETTINGS
Turn the volume knob to select
,
then press the knob.
3
Turn the volume knob to select
AUX NAME
then press the knob.
4
Turn the volume knob to select a desired AUX
name to be displayed for AUX source and then
press the knob.
"AUX", "DVD", "PORTABLE", "GAME", "VIDEO", or "TV".
5
Press and hold [6] to exit.
10. AUDIO SETTINGS
10.1 Audio controls
You can adjust audio by setting the following audio
control items;
1
Press [8SRC] to select a source other than
"STANDBY".
2
Press the volume knob to enter Function
mode.
"FUNCTION" appears.
3
,
Turn the volume knob to select
CONTROL
, then press the knob.
4
Turn the volume knob to select an audio
control item, then press the knob.
- See table below for selection.
- Repeat step 4 until the desired item is selected/
activated.
- Press [ 6 ] to return to the previous item.
5
Press and hold [6] to exit.
Display
Description
SUB-W LEVEL
–15 to +15 (0): Adjust the subwoofer output
†
level.
BASS LEVEL
–8 to +8 (0): Adjust the level to memorize in
each source. (Before making an adjustment,
MID LEVEL
select the source you want to adjust.)
TRE LEVEL
EQ PRO (for
)
KDC-X797
BASS ADJUST
BASS CTR FRQ
60/ 80/ 100/ 200: Select the center frequency.
BASS LEVEL
–8 to +8 (0): Adjust the level.
BASS Q FACTOR 1.00/ 1.25/ 1.50/ 2.00: Adjust the quality
factor.
BASS EXTEND
ON: Turns on the extended bass. ;
OFF: Turns off the extended bass.
MID ADJUST
MID CTR FRQ
0.5K/ 1.0K/ 1.5K/ 2.5K: Select the center
frequency.
MID LEVEL
–8 to +8 (0): Adjust the level.
MID Q FACTOR 0.75/ 1.00/ 1.25: Adjust the quality factor.
TRE ADJUST
TRE CTR FRQ
10.0K/ 12.5K/ 15.0K/ 17.5K: Select the
center frequency.
TRE LEVEL
–8 to +8 (0): Adjust the level.
PRESET EQ
NATURAL/ USER/ ROCK/ POPS/ EASY/
TOP40/ JAZZ/ POWERFUL: Select a preset
sound mode suitable to the music genre.
(Select "USER" to use the customized bass,
middle, and treble settings.)
BASS BOOST
LV1/ LV2/ LV3: Select your preferred bass
boost level. ; OFF: Disables level selection.
LOUDNESS
LV1/ LV2: Select your preferred low and high
frequencies boost to produce a well-balanced
sound at a low volume level. ; OFF: Disables
level selection.
BALANCE
L15 to R15 (0): Adjust the left and right
speaker output balance.
FADER
R15 to F15 (0): Adjust the rear and front
speaker output balance.
SUBWOOFER SET
ON: Turns on the subwoofer output. ;
OFF: Turns off the subwoofer output.
DETAILED SET
HPF
THROUGH: All signals are sent to the front
speaker. ;
100/ 120/ 150 (HZ): Frequencies lower than
the specified value are cut off.
AUDIO
LPF SUBWOOFER
THROUGH: All signals are sent to the
†
subwoofer. ; 85HZ/ 120HZ/160HZ:
Frequencies higher than the specified value
are cut off.
SUB-W PHASE
REVERSE (180°)/
†
phase angle of the subwoofer output to be
in line with the speaker output for optimum
performance. (Selectable only if a setting other
than "THROUGH" is selected for "LPF SUB-W".)
SUPREME SET
ON: Creates realistic sound by interpolating
the high-frequency components that are lost
in MP3/WMA/AAC/WAV audio compression
and iPod. ;
OFF: Disables creation. (Selectable only when
playing back an MP3/WMA/AAC/WAV disc,
USB device or iPod.)
VOLUME OFFSET
–8 to +8 (0) (for AUX) ; –8 to
sources): Presets the volume adjustment
level of each source. The volume level will
automatically increase or decrease when
you change the source. (Before making an
adjustment, select the source you want to
adjust.)
(Colored
text: Factory setting)
† "SUB-W LEVEL"/ "LPF SUBWOOFER"/ "SUB-W PHASE" is
selectable only if "SUBWOOFER SET" is set to "ON".
About Supreme
• Technology to extrapolate and supplement with proprietary
algorithm, the high-frequency range that is cut off when
encoding at low bit rate.
Supplementing is optimized by compression format (AAC,
MP3, WMA or WAV) and processed according to bit rate.
The effect is negligible with music that is encoded at high
bit rate, variable bit rate or has minimal high frequency
range.
NORMAL
(0°): Select the
0
(for other
27
|
English
Hide quick links:
Advertisement
Chapters
Table of Contents
