Power Acoustik Mofo 12 Specifications

When technology advances, products do as well. Does Lamborghini need to refine their cars every 2 years?
NO, they do because they can. After 6 years, it is time for a change. Say "See Ya!" to the old MOFO, and wel-
come the new MOFO-X subwoofers! The new motor is refined and increases efficiency dramatically! MOFO-X subs
use a non-pressed pulp cone for durability and smooth low bass. Like the original MOFOs, the new models use an
aluminum dustcap that couples to the voice coil former and extends over the cone. Why? The fins brace the cone
and eliminate cone flex during high excursion. Since the cap is aluminum and coupled to the coil former, it acts as
a heat sink or heat extractor. Using the latest materials, the new MOFO-X subs yield superior performance!
Royal Blue Finish w/ Diamond Cut Accents
Die Cast Aluminum Voice Coil Heatsink
Polyether Foam Surround
2.5" 4-Layer Voice Coil on Aluminum Former

Driver Specifications

Series Wired 122X
FS (Hz) 28.9
QMS 5.559
3
VAS (ft ) 1.367
X-MAX (mm) 15
23
X-MECH (mm)
QES 0.429
RE (Ω) 3.922
BL (Tesla) 20.28
RMS Power 1,500
MAX Power 2,700
QTS 0.399
SPL (1w/1m dB) 85.4
Voice Coil DVC 2Ω
Overall Diameter 12.625"
Overall Height 7.875"
Mounting Depth 6.875"
Cutout Diameter 11.25"
Motor Diameter 7.875"
3"
Motor Height
Flange Width .75"
Flange Height .625"
Weight 26lbs.

MOFO-X Features

Non-Pressed Pulp Cone
124X 152X 154X
30.3 24.1 24.4
6.11 6.103 5.95
1.353 4.077
3.761
15 15
23 23 23
0.47 0.480 0.51
7.22 3.95 7.23
25.7 21 26.3
1,500 1,700 1,700
2,700 3,000 3,000
.44 0.445 0.47
85.4 86.9 87
DVC 4Ω DVC 2Ω DVC 4Ω
12.625" 15.5" 15.5"
7.875" 9.25" 9.25"
6.875" 8.125" 8.125"
11.25" 14.125" 14.125"
7.875" 7.875" 7.875"
3" 3"
.75" .75" .75"
.625" .625" .625"
26lbs. 30lbs. 30lbs.
WWW.POWERACOUSTIK.COM
Nickel Plated 8ga Compression Wire Terminals
170oz Strontium Ferrite Magnet

Enclosure Recommendations

All enclosures should be made of .75" (3/4") material only.
When possible, make the baffle 1.5" (1 1/2") thick and
add .75" (3/4") to the depth of the enclosure to compensate.
All volumes INCLUDE vent/port and subwoofer displacements.
15
DO NOT change the volume unless you plan on adding a sub-
stantial amount of bracing. For added performance, applying
a coat of fiberglass resin to the interior walls will greatly
improve sealing the enclosure. Adding a thin layer of poly-fill
will improve response by smoothing out enclosure reflections.
MOFO-12 Sealed
Cubic
Feet
1.00
MOFO-15 Sealed
Cubic
3"
Feet
2.00
Turn over for woofer wiring diagrams...
Dual Poly-Cotton Spiders
Die-Cast Aluminum Frame
Vented Pole Piece
MOFO-12 Ported
Cubic
F3 (Hz) Port Diameter
Feet
54.0 2.00 4" x 12"
MOFO-15 Ported
Cubic
F3 (Hz) Port Diameter
Feet
40 4.00 (2) 4" x 11.75"
Tuning
(Hz)
36.8
Tuning
(Hz)
35.6