Tuner Operation; Station Preset Memory; Direct Access Tuning - Kenwood KDC-X592 Instruction Manual

Tuner Operation
Station Preset Memory
Putting a station in the memory.
1
Select the frequency to put In the memory
Push the Control knob towards right or left.
2
Enter Preset Memory mode
Select
"P.MEM'~
For how to select Function Control item, refer to
<Function Control> (page 6).
3
Select the number to put In the memory
Turn the Control knob.
4
Determine the number to put In the memory
Press the Control knob.
S
Allow the determined number to take effect
Press the Control knob.
Cancelling the
Preset Memory mode
Press the [FNC] button.
Preset Tuning
Recalling the stations in the memory.
1
Enter Preset Tuning Select mode
Turn the Control knob.
A station list is displayed.
2
Select a desired station in the memory
Turn the Control knob.
3
Recall the station
Press the Control knob.
Cancelling
Preset
Tuning
Press the [FNC] button.
12
I
KDC-X592/ KDC-MP538U
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
u u
is displayed.
2
Enter the frequency
Press the number buttons on the remote
control.
Example:
t_ _
92.1 MHz (FM) -: - : - , [ 0 ): : . . . : , [ . , . : : 9 1, . . . . : . . , [ 2 - : . : . - 1 , c -'[1]'-- _
810 kHz (AM) [01, [81, [1), [0)
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
~
~
• You can enter the FM band frequency in steps of a
minimum of 0.' MHz.