Fortinet FortiGate-110C Quick Start Manual

LED State
Green
Power
Off
Green flashing
Status
Green
Green
HA
Off
Amber
Alarm
Off
Green
Left LED
Ports 1 to 8,
WAN1, WAN2
Off
Green
Right LED
Ports 1 to 8, Amber
WAN1, WAN2
Off
Visit these links for more information and documentation for your Fortinet product.
• Technical Documentation - http://docs.forticare.com
• Fortinet Knowledge Center - http://kc.forticare.com
• Fortinet Technical Support - http://support.fortinet.com
Package Contents
1 2 3 4
8 port switch
Connecting
Connect the following to the FortiGate unit. Ensure the FortiGate unit is placed on a stable
surface.
• Insert a network cable to WAN 1. Insert the other end to the router connected to the
Internet, or to the modem.
• Connect a network cable to the Internal port. Insert the other end to a computer or
switch.
• Connect the AC Power Cord to the Power Supply.
• Connect the Power Cord to a surge protected power bar or power supply.
Configuration Tools
Web-based manager
The FortiGate web-based manager is an easy to use management tool.
Use it to configure the administrator password, the interface and default gateway addresses,
and the DNS server addresses.
Requirements:
• An Ethernet connection between the FortiGate unit and management computer.
• A web browser such as FireFox or Internet Explorer on the management computer.
Description
The FortiGate unit is on.
The FortiGate unit is off.
Flashes during startup
The FortiGate unit is running normally.
The FortiGate unit is running in HA mode.
The FortiGate unit is not in HA mode.
TBD
The FortiGate unit is running normally.
The correct cable is in use and the connected equipment
has power.
No network cable connected.
Network speed of 1000 Mb/s.
Network speed of 100 Mb/s.
Network speed of 10 MB/s.
Connector Type Speed
Ports 1 to 8 RJ-45 10/100 Base-T
WAN1, WAN2 RJ-45 10/100/1000 Base-T
CONSOLE RJ-45 9600 bps
8/N/1
USB USB
RJ-45 serial
connection
USB
USB
5 6 7 8 WAN1 WAN2
WAN1 WAN2
QuickStart Guide
© Copyright 2009 Fortinet Incorporated. All rights reserved.
Products mentioned in this document are trademarks or registered trademarks
of their respective holders.
Regulatory Compliance
FCC Class B Part 15 CSA/CUS
19 November 2010
Protocol Description
Ethernet 8-port switch connection to up to eight devices or the internal network.
Ethernet Optional redundant connection to the Internet.
RS-232 Optional connection to the management computer.
serial Provides access to the command line interface.
USB Optional connection for USB key for firmware backup and installation.
CONSOLE
ALARM HA STATUS POWER
AC power
connection
Ethernet cables connect
to computers on the
internal network
1
Command Line Interface (CLI)
The CLI is a full-featured management tool. Use it to configure the administrator password,
the interface addresses, the default gateway address, and the DNS server addresses. To
configure advanced settings, see the Tools and Documentation CD included with the
FortiGate unit.
Requirements:
• The RJ-45 to DB9 serial connection between the FortiGate unit and management com-
puter.
• A terminal emulation application (HyperTerminal for Windows) on the management
computer.
1 2 3 4 5 6 7 8 WAN1
Rack-Mount
Brackets
Tools and Documenation
Straight-through RJ-45 to
Ethernet cable DB-9 Serial Cable
Ethernet cables for redundant
connection to the Internet
(public switch or router)
2 3 4 5 6 7 8 WAN1
FortiGate-110C
USB CONSOLE
WAN2
ALARM HA STATUS POWER
01-412-0468-20101119
QuickStart Guide
FortiGate-30B
USB CONSOLE
1 2 3 4 5 6 7 8 WAN1 WAN2
ALARM HA STATUS POWER
Copyright 2008 Fortinet Incorporated. All rights reserved.
Trademarks
Welcome | Bienvenue | Willkommen | | Bienvenido | Benvenuto
Power Cable
RJ-45 to DB-9 serial cable
connects to management
computer
USB CONSOLE
WAN2
ALARM HA STATUS POWER
Power cable
connects to
power supply