Add A Group Contact; Edit A Group Contact; Add Members To A Group - Kyocera Verve User Manual

3. Press DELETE (left softkey).

Add a Group Contact

You can create a group by assigning Contacts entries as members and then naming the new
group. Each group entry can contain up to 40 members for sending messages.
1. From standby mode, press CONTACTS (right softkey) > Add New... > New Group.
2. Read the message and press START (left softkey).
3. Highlight an entry you want to add to a group and press
in the box next to the selected entry.

If the entry has more than one number, select a number or numbers and press
DONE (left softkey). Each selected number will be added as a separate entry to the
group.
Tip: Press OPTIONS (right softkey) > Enter New Address or Recent History to enter a new
phone number or address or to select an entry from your history.
4. When you have selected all the entries you want to add, press CONTINUE (left softkey).
5. Enter a group name and press

Edit a Group Contact

Manage the group contacts you create.

Add Members to a Group

You can add group members to existing groups.
1. From standby mode, press CONTACTS (right softkey).
2. Highlight the group you want to add members to and press OPTIONS (right softkey) >
Edit Group > Add More.
3. Read the message and press START (left softkey).
4. Highlight an entry you want to add and press

If the entry has more than one number, select a number or numbers and press
DONE (left softkey). Each selected number will be added as a separate entry to the
group.
5. Repeat step 4 to add additional members.
6. Press CONTINUE (left softkey) > SAVE (left softkey).
Contacts
> SAVE (left softkey).
.
. A check mark will appear
37