JVC AV-48P777/H Service Manual page 23

4.5.2 DESCRIPTION OF STATUS DISPLAY
The status display on the upper part of the SERVICE MODE screen is common (to all models).
4.5.2.1 DIGITAL SERVICE MODE
1. Adjust
SETTING ITEM No.
SETTING ITEM
A001 IN LEVEL
NTSC 43Full
SIGNAL SYSTEM SCREEN MODE VIDEO STATUS
(1) SIGNAL SYSTEM
The signal displayed on the screen is displayed.
NTSC : 525i (Composite / S-video input)
525i : 525i (Component input)
525p : 525p (Component input)
750p : 750p (Component input)
1125i : 1125i (Component input)
D525i : ATSC 525i
D525p : ATSC 525p
D750p : ATSC 750p
D1125i : ATSC 1125i
H525i : HDMI 525i
H525pS1 : HDMI 525p size1
H525pS2 : HDMI 525p size2
H750p : HDMI 750p
H1125i : HDMI 1125i
(2) SCREEN MODE
State of the ASPECT is displayed.
43Full : FULL (Input signal 4 : 3)
43Pano : PANORAMA (Input signal 4 : 3)
43Cinema : CINEMA (Input signal 4 : 3)
43Regular : REGULAR (Input signal 4 : 3)
16Full : FULL (Input signal 16 : 9)
16Pano : PANORAMA ZOOM (Input signal 16 : 9)
16Cinema : CINEMA ZOOM (Input signal 16 : 9)
16Slim : SLIM (Input signal 16 : 9)
(3) VIDEO STATUS
State of the VIDEO STATUS is displayed.
Standard : STANDARD
Dynamic : DYNAMIC
Theater : THEATER
Game : GAME
SETTING VALUE (DATA)
6
Dynamic H
WHITE BALANCE
(4) WHITE BALANCE
State of the WHITE BALANCE is displayed.
H : HIGH
L : LOW
(5) SETTING ITEM NAME
Setting item name are displayed. For the setting item names
to be displayed, refer to "INITIAL SETTING VALUE OF
SERVICE MODE".
(6) SETTING ITEM NO.
Setting item numbers are displayed. The setting item numbers
to be displayed are listed below.
Item No.
A001 - A010 Audio system setting
SELECTION OF SETTING ITEM
• [CH+] / [CH-] key.
Change the setting items up/ down.
A001... ↔ A010
(7) SETTING VALUE (DATA)
The SETTING VALUE is displayed.
CHANGE OF SETTING VALUE (DATA)
• [VOL+] / [VOL-] key.
Change the setting values up/down.
MEMORY OF SETTING VALUE (DATA)
Changed setting value is memorized by pressing
[MUTING] key.
2. Memory Edit
Data in the EEPROM is edited on this screen. [Do not adjust]
CAUTION:
This mode is not used in the ADJUSTMENT. Press the
[BACK] key to return to the SERVICE MENU SCREEN.
MEMORY EDIT MODE
Digital Memory Edit Digital Memory Edit
Addr (H) 0000 Addr (H) 0000
0 0 1 1
04 04 01 01 06 06
8 8 9 9
11 11 29 29 00 00
Setting item
2 2 3 3 4 4 5 5 6 6 7 7
58 58 FF FF FF FF FF FF FF FF
A A B B C C D D E E F F
00 00 01 01 FF FF FD FD FD FD
(No.YA455)1-23