1-9: CHASSIS BLOCK
Do the wire fixing as shown in the photo, then install the Chassis Ass'y.
1.
Install the Stand Ass'y.
2.
Band Cord Clamp
1-10: CABINET BACK/COVER BACK
1.
Check if the wire handlings are correct.
2.
Check if the cushion positions are correct.
3.
Check if the tape positions are correct.
4.
Install the Cabinet Back and Cover Back.
DISASSEMBLY INSTRUCTIONS
Sheet Earth Mark
B1-8
Earth wire
Band Cord Clamp
Earth wire of AC Inlet.
Need help?
Do you have a question about the 42HP66 and is the answer not in the manual?
Questions and answers