Panasonic Lumix DMC-FS3P Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Digital Camera
  5. DMCFS3P - Lumix Digital Camera
  6. Service manual

Panasonic Lumix DMC-FS3P Service Manual

Hide thumbs Also See for Lumix DMC-FS3P:
Table of Contents

Advertisement

Quick Links

DMC-FS3P
Model No.
DMC-FS3PC
DMC-FS3PL
DMC-FS3PR
DMC-FS3E
DMC-FS3EB
DMC-FS3EE
DMC-FS3EF
DMC-FS3EG
DMC-FS3GC
DMC-FS3GD
DMC-FS3GK
DMC-FS3GN
DMC-FS3GT
DMC-FS3GJ
Vol. 1
Colour
(S)...........Silver Type (except PR)
(K)...........Black Type (except P/GT)
(P)...........Pink Type (except GD/GK)
(A)...........Blue Type (except GC/GD/GK/GN/GT/GJ)
(G)...........Green Type (only P)
© 2008 Matsushita Electric Industrial Co., Ltd. All
rights reserved. Unauthorized copying and distribu-
tion is a violation of law.
ORDER NO. DSC0802003CE
B26

Digital Camera

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Lumix DMC-FS3P and is the answer not in the manual?

Questions and answers

Related Manuals for Panasonic Lumix DMC-FS3P

Summary of Contents for Panasonic Lumix DMC-FS3P

  • Page 1: Digital Camera

    ORDER NO. DSC0802003CE Digital Camera DMC-FS3P Model No. DMC-FS3PC DMC-FS3PL DMC-FS3PR DMC-FS3E DMC-FS3EB DMC-FS3EE DMC-FS3EF DMC-FS3EG DMC-FS3GC DMC-FS3GD DMC-FS3GK DMC-FS3GN DMC-FS3GT DMC-FS3GJ Vol. 1 Colour (S)...Silver Type (except PR) (K)...Black Type (except P/GT) (P)...Pink Type (except GD/GK) (A)...Blue Type (except GC/GD/GK/GN/GT/GJ) (G)...Green Type (only P)

  • Page 2: Table Of Contents

    TABLE OF CONTENTS PAGE PAGE 1 Safety Precaution -------------------------------------------------3 1.1. General Guidelines ----------------------------------------3 1.2. Leakage Current Cold Check ---------------------------3 1.3. Leakage Current Hot Check (See Figure 1.)--------3 1.4. How to Discharge the Capacitor on Flash Top PCB------------------------------------------------------------4 2 Warning --------------------------------------------------------------5 2.1.

  • Page 3: Safety Precaution

    1 Safety Precaution 1.1. General Guidelines 1.3. Leakage Current Hot Check 1. IMPORTANT SAFETY NOTICE (See Figure 1.) There are special components used in this equipment 1. Plug the AC cord directly into the AC outlet. Do not use which are important for safety. These parts are marked by an isolation transformer for this check.

  • Page 4: How To Discharge The Capacitor On Flash Top Pcb

    1.4. How to Discharge the Capacitor on Flash Top PCB CAUTION: 1. Be sure to discharge the capacitor on FLASH TOP PCB. 2. Be careful of the high voltage circuit on FLASH TOP PCB when servicing. [Discharging Procedure] 1. Refer to the disassemble procedure and Remove the necessary parts/unit. 2.

  • Page 5: Warning

    2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD).

  • Page 6: Caution For Ac Cord(For Eb/Gc

    A replacement fuse cover can be purchased from your local 2.3.2.3. How to Replace the Fuse Panasonic Dealer. 1. Remove the Fuse Cover with a screwdriver. If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safety.

  • Page 7: How To Replace The Lithium Battery

    2.4. How to Replace the Lithium Battery 2.4.1. Replacement Procedure 1. Remove the MAIN PCB. (Refer to Disassembly Procedures.) 2. Remove the Lithium battery (Ref. No. “B9101” at foil side of MAIN PCB) and then replace it into new one. NOTE: This Lithium battery is a critical component.

  • Page 8: Service Navigation

    3 Service Navigation 3.1. Introduction This service manual contains technical information, which allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual. 3.2.

  • Page 9: How To Define The Model Suffix (Ntsc Or Pal Model)

    3.4. How to Define the Model Suffix (NTSC or PAL model) There are seven kinds of DMC-FS3, regardless of the colours. • a) DMC-FS3 (Japan domestic model) • b) DMC-FS3P/PC • c) DMC-FS3E/EB/EF/EG/GN • d) DMC-FS3EE • e) DMC-FS3GD • f) DMC-FS3GT/GK •...

  • Page 10: Initial Settings

    3.4.2. INITIAL SETTINGS: When you replace the Main PCB, be sure to perform the initial settings after achieving the adjustment by ordering the following pro- cedure in accordance with model suffix of the unit. 1. IMPORTANT NOTICE: Before proceeding Initial settings, be sure to read the following CAUTIONS. 2.
  • Page 11 1) As for your reference Default setting condition is given in the following table. • Default setting (After “INITIAL SETTINGS”) MODEL VIDEO OUTPUT LANGUAGE DATE REMARKS a) DMC-FS3 (Japan domestic model) NTSC Japanese Year/Month/Date b) DMC-FS3P/PC/PL NTSC English Month/Date/Year c) DMC-FS3E/EB/EG/GC/GN/PR English Date/Month/Year d) DMC-FS3EF French Date/Month/Year e) DMC-FS3EE...

  • Page 12: Specifications

    4 Specifications...

  • Page 13: Location Of Controls And Components

    5 Location of Controls and Components...

  • Page 15: Service Mode

    6 Service Mode 6.1. Error Code Memory Function 1. General description This unit is equipped with history of error code memory function, and can be memorized 16 error codes in sequence from the latest. When the error is occurred more than 16, the oldest error is overwritten in sequence. The error code is not memorized when the power supply is shut down forcibly (when the unit is powered on by the battery, the battery is pulled out) because the error code is memorized to FLASH ROM when the unit is powered off.
  • Page 16 • 5. How to read the error code: One error code is displayed for 8 bit, the contents of error codes is indicated the table as shown below. Attribute Main item Sub item Error code Contents (Upper) High 4 bits Low 4 bits Check point (Lower) LENS Lens drive...
  • Page 17 Attribute Main item Sub item Error code Contents (Upper) High 4 bits Low 4 bits Check point (Lower) HARD VENUS A/D Flash 28*0 0000 Flash charging error. IC6001-(AC17) signal line or Flash charging circuit FLASH ROM FLASH ROM 2B*0 0001 EEPROM read error (EEPROM (EEPROM...

  • Page 18: Service Fixture & Tools

    7 Service Fixture & Tools 7.1. Service Fixture and Tools The following Service Fixture and tools are used for checking and servicing this unit.

  • Page 19: When Replacing The Main Pcb

    7.2. When Replacing the Main PCB After replacing the MAIN PCB, be sure to achieve adjustment. The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-PAVC” web-site in “TSN system”, together with Maintenance software. 7.3. Service Position This Service Position is used for checking and replacing parts.

  • Page 20: Disassembly And Assembly Instructions

    8 Disassembly and Assembly Instructions 8.1. Disassembly Flow Chart 8.2. PCB Location...

  • Page 21: Disassembly Procedure

    8.3. Disassembly Procedure 8.3.1. Removal of the Rear Case Unit Item Removal Rear Case Unit Fig.D1 Card Battery 1 Screw (A) 3 Screws (B) 1 Lock A 2 Locks B Fig.D2 FP9004(Flex) FP9103(Flex) Rear Case Unit LCD Unit Fig.D3 2 Locking tabs LCD Unit Front Case Unit Fig.D4...
  • Page 22 8.3.3. Removal of the Front Case Unit Fig.D4 8.3.4. Removal of the Top Operation Unit Fig.D2 8.3.2. Removal of the LCD Unit Fig.D3 Fig.D5...
  • Page 23 8.3.5. Removal of the Flash Top P.C.B. Fig.D7 Fig.D6...
  • Page 24 8.3.6. Removal of the Lens Unit 8.3.7. Removal of the Main P.C.B. Fig.D9 8.3.8. Removal of the SD FPC Unit Fig.D8 Fig.D10...
  • Page 25 8.3.9. Removal of the Battery Case Unit 8.3.11. Removal of the Battery Door Unit Fig.D13 NOTE: (When Assembling) Be sure to confirm the following points when assembling. • The Screw is tightened enough. • Assembling conditions are fine. (No distortion, no illegal- space.) •...

  • Page 26: Disassembly Procedure For The Lens

    8.4. Disassembly Procedure for the Lens NOTE: When Disassembling and Assembling for the Lens 1. To minimize the possibility of the CCD being dirt, perform disassemble and/or assemble under the condition of the CCD is being mounted. Disassembling procedures for the CCD unit, refer to item 8.6.
  • Page 27 8.4.2. Removal of the Master Flange Unit 8.4.3. Removal of the 1st Lens Frame/2nd Lens Frame Move Unit 8.4.4. Removal of the 2nd Lens Frame Move Unit...

  • Page 28: Assembly Procedure For The Lens

    8.4.5. Removal of the Drive/Direct Frame 8.5. Assembly Procedure for the Unit Lens 8.5.1. Phase alignment of the Direct Frame and Drive Frame Unit 8.5.2. Phase alignment of the Drive/Direct Unit and Fixed Frame Unit...
  • Page 29 8.5.3. Assembly for the 1st Lens Frame 8.5.4. Assembly for the 2nd Lens Frame Unit and Fixed/Drive/Direct Frame Move Unit and Fixed/Drive/Direct Unit Frame/1st Lens Frame Unit...

  • Page 30: Removal Of The Ccd Unit

    8.5.5. Assembly for the Master Flange 8.6. Removal of the CCD Unit Unit and Fixed/Drive/Direct Frame/ To prevent the CCD unit from catching the dust and dirt, do not 1st Lens Frame/2nd Lens Frame remove the CCD unit except for replacing. Move Unit...

  • Page 31: Removal Of The Focus Motor Unit

    8.7. Removal of the Focus Motor 8.8. Applyment Grease Unit Method The grease apply point of lens unit are as follows. Apply grease additionally in the specified position if necessary. When the grease is applied, use a toothpick and apply thinly. •...

  • Page 32: Measurements And Adjustments

    9 Measurements and Adjustments 9.1. Matrix Chart for Replaced Part and Necessary Adjustment The relation between Replaced part and Necessary Adjustment is shown in the following table. When concerned part is replaced, be sure to achieve the necessary adjustment(s). As for Adjustment condition/procedure, consult the “Adjustment Manual” which is available in Adjustment software. The Adjustment software is available at “TSN Website”, therefore, access to “TSN Website”...

  • Page 33: Maintenace

    10 Maintenace 10.1. Cleaning Lens and LCD Panel Do not touch the surface of lens and LCD Panel with your hand. When cleaning the lens, use air-Blower to blow off the dust. When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface. Note: The Lens Cleaning KIT ;...
  • Page 34 3.The voltage being indicated on the schematic diagram is measured in "Standard-Playback" mode when there is no specify mode is mentioned. Model No. DMC-FS3P DMC-FS3EG 4.Although the voltage and waveform available on here is measured with standard frame, it may be differ from actual measurement due to modification of circuit and so on.

  • Page 35: S2. Voltage Chart

    S2. Voltage Chart Note) Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard. Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester. S2.1.

  • Page 36: S3. Block Diagram

    S3. Block Diagram S3.1. Overall Block Diagram (33mm ~ 100mm) IC3001 PRE PROCESS X6001 (24MHz) 1/2.5" 8 MEGA PIX CDS, AGC, A/D, TG, CCD DRIVER ZOOM IRIS SHUTTER OIS UNIT FOCUS CARD IC9101 SYSTEM IC MOTOR DRIVE, OIS DRIVE& IC9101 MICROPHONE PRE PROCESS SYSTEM IC...

  • Page 37: S4. Schematic Diagram

    S4. Schematic Diagram S4.1. Interconnection Diagram ET8001 FLASH TOP P.C.B. (COMPONENT SIDE) M8001 : (FOIL SIDE) MICROPHONE PS8001 ET8002 P8002 SPEAKER BATTERY FP9005 SDCD SDDAT2 SDDAT3 SDCMD SDDAT0 SDDAT1 SDWP SD FPC UNIT D GND D GND D GND SDCLK FRAME GND FRAME GND FRAME GND...

  • Page 38: S4.2. Flash Top Schematic Diagram

    S4.2. Flash Top Schematic Diagram CAUTION: FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, REPLACE ONLY WITH THE SAME TYPE 1.25A 32V FUSE. ATTENTION: POUR UNE PROTECTION CONTINUE LES RISQUES 1.25A 32V D' INCENDIE N' UTILISERQUE DES FUSIBLE DE MÉME TYPE 1.25A 32V. CAUTION: FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, REPLACE ONLY WITH THE SAME TYPE 1.5A 32V FUSE.

  • Page 39: S4.3. Sd Flex Schematic Diagram

    S4.3. SD Flex Schematic Diagram DMC-FS3 SD Flex Schematic Diagram...

  • Page 40: S4.4. Ccd Flex Schematic Diagram

    S4.4. CCD Flex Schematic Diagram DMC-FS3 CCD Flex Schematic Diagram...

  • Page 41: S4.5. Lens Flex Schematic Diagram

    S4.5. Lens Flex Schematic Diagram POSITIVE VOLTAGE LINE ENC VCC LED CONT PHOTO CO. BARREL ENCODER SENSOR XVO+ (FULL RETRACT) XVH- HALL SENSOR (X) XVO- XVH+ OIS UNIT XDRV- DRIVE COIL (X) XDRV+ STAP STAP DC SOLENOID (IRIS) STAN STAN SHUTTER UNIT DC SOLENOID (SHUTTER)

  • Page 42: S5. Print Circuit Board

    S5. Print Circuit Board S5.1. Flash Top P.C.B. (Component Side) (Foil Side) DMC-FS3 Flash Top P.C.B.

  • Page 43: S5.2. Sd Flex P.c.b

    S5.2. SD Flex P.C.B. / S5.3. CCD Flex P.C.B. (Component Side) (Foil Side) (Foil Side) DMC-FS3 DMC-FS3 SD Flex P.C.B. CCD Flex P.C.B. S-10...

  • Page 44: S5.4. Lens Flex P.c.b

    S5.4. Lens Flex P.C.B. SHUTTER UNIT ZOOM MOTOR UNIT OIS UNIT CO. BARREL ENCODER Pin 1 (FULL RETRACT) ZOOM ENCODER 2 ZOOM ENCODER 1 Pin 45 FOCUS MOTOR UNIT DMC-FS3 LENS FLEX P.C.B. S-11...
  • Page 45 S-12...

  • Page 46: S6. Replacement Parts List

    S6. Replacement Parts List Note: 1.* Be sure to make your orders of replacement parts according to this list. 2. IMPORTANT SAFETY NOTICE Components identified with the mark have the special characteristics for safety. When replacing any of these components, use only the same type. 3.
  • Page 47 DMC-FS3P/PC/PL/PR/EB/EE/EF/EG/E/GC/GD/GK/GN/GT/GJ Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks ------ P.C.B. LIST ------ VEP58052A FLASH TOP P.C.B. 1 (RTL) E.S.D. VEK0L87 CCD UNIT 1 [PAVC-CSG] E.S.D. --- INDIVIDUAL PARTS --- C8003 F2A2F9500002 E.CAPACITOR...
  • Page 48 DMC-FS3P/PC/PL/PR/EB/EE/EF/EG/E/GC/GD/GK/GN/GT/GJ Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks L8001 G5F1A0000026 CHIP INDUCTOR LB8001 J0JCC0000415 FILTER M8001 L0CBAA000012 MICROPHONE P8002 K4ZZ03000334 BATTERY CATCHER PS8001 K1KB30AA0123 CONNECTOR Q8001 B1JBLP000015 TRANSISTOR 1 E.S.D. Q8009 B1DFCG000020 TRANSISTOR 1 E.S.D.
  • Page 49 DMC-FS3P/PC/PL/PR/EB/EE/EF/EG/E/GC/GD/GK/GN/GT/GJ Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VGQ9878 CCD SHEET VHD1998 SCREW VEK0L83 SD FPC UNIT VHD2004 SCREW VEP56057B MAIN P.C.B. 1 (RTL) E.S.D. VHD2004 SCREW  4 ML421S/ZTE BUTTON BATTERY...
  • Page 50 DMC-FS3P/PC/PL/PR/EB/EE/EF/EG/E/GC/GD/GK/GN/GT/GJ Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VPF1302 CAMERA BAG 1 P,PC,PL  201 DE-A39BA/SX BATTERY CHARGER 1 P,PC,PL  202 ------------ BATTERY 1 P,PC,PL K1HA08CD0007 USB CABLE W/PLUG 1 P,PC,PL...
  • Page 51 DMC-FS3P/PC/PL/PR/EB/EE/EF/EG/E/GC/GD/GK/GN/GT/GJ Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VPK3486 PACKING CASE 1 PR-K,EB-K,EE-K,EF-K,EG-K, VPF1302 CAMERA BAG 1 (EXCEPT P,PC,PL) E-K,GC-K,GD-K,GN-K,GJ-K  301 DE-A40PA/SX BATTERY CHARGER 1 PR VPK3491 PACKING CASE 1 PR-P,EB-P,EE-P,EF-P,EG-P, ...

  • Page 52: S7. Exploded View

    S7. Exploded View S7.1. Frame and Casing Section 33-1 33-2 12-2 12-1 B100 B101 B102 B108 114-1 B103 B104 114-3 B105 114-2 B106 113-2 113-3 B107 113-1 S-19...

  • Page 53: S7.2. Packing Parts And Accessories Section (1

    S7.2. Packing Parts and Accessories Section (1) S-20...

  • Page 54: S7.3. Packing Parts And Accessories Section (2

    S7.3. Packing Parts and Accessories Section (2) (DMC-FS3E/EE/EF/EG/GC/GJ) (DMC-FS3EB/GC) (DMC-FS3GD) (DMC-FS3GK/GT) (DMC-FS3GN/PR) S-21...

This manual is also suitable for:

Lumix dmc-fs3pcLumix dmc-fs3prLumix dmc-fs3eLumix dmc-fs3ebLumix dmc-fs3eeLumix dmc-fs3ef ... Show all

Table of Contents