Digital Projection E-Vision 7500 WUXGA 3D Specification Sheet

E-Vision 7500 WUXGA 3D (Preliminary)
TBA Lumens | Contrast Ratio: 2,400:1 (Dynamic Black) 1,000:1 native | Part No:114-305
Colour System:
6 Segment RYGCWB Colour Wheel for maximum brightness.
6 Segment RGBCMY Colour Wheel for optimised
colourimetry - user swappable.
Display Type:
1 x 0.67" DarkChip™ DMD™

Key Features

Video & Graphics Processing
HDMI 1.4 for Side by Side, Frame Packing & Top Bottom Formats.
Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
BrilliantColor™ for increased system brightness.
DynamicBlack™ for improved black levels in dark scenes.
High Bandwidth Digital & Analog Receiver with 10 Bit A-D.
Independent control of hue, saturation and gain for primary and secondary colours.
The projector automatically detects interlaced video and implements 3:2 or 2:2 extraction as appropriate, with
pixel based, motion adaptive interpolation and auto cadence correction.
24p and 1080p native display.
Geometry Correction
Vertical keystone correction.
HDBaseT® Interface
Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
Allows projector to be placed up to 100m from source.
Source Compatibility:
HDMI including Deep Color™ processing.
Graphics standards up to 1920 x 1200 resolution at 60Hz via DVI, HDMI, DisplayPort or VGA.
DVI single link with HDCP compliance.
Component Video (SD and HD) via YPrPb, RGBHV, RGB or RGBS.
Specification Sheet
DMD Specification:
1920 x 1200 pixels native.
Fast transit pixels for smooth greyscale and improved
contrast.
Aspect Ratio:
16x10
Fill Factor
87%