Specifications - Kenwood DPF-1010 Service Manual

DPF-1010/1010E/2010/2010E/3010/3010E

Specifications

[ Format ]
System ......................................Compact disc digital audio system
Laser ..................................................................Semiconductor laser
[ D/A Convertors ]
D/A Conversion ............................................................................1 Bit
Oversampling ............................................................ 8 fs (352.8 kHz)
[ Audio ] (for DPF-3010)
Frequency response ...................................... 4 Hz ~ 20 kHz, 0.5 dB
Signal to noise ratio ............................................. More than 100 dB
Dynamic range ....................................................... More than 95 dB
Total harmonic distortion + noise ...... Less than 0.006% (at 1 kHz)
Channel separation ............................... More than 95 dB (at 1 kHz)
Wow & flutter ................................................... Unmeasurable Limit
Output level/impedance
Variable ........................................................ (Max.) 2.0 V/0.8 k
Digital output
Optical ........................................................–15 dBm – –21 dBm
Headphone output (Max.) .......................................... 20 mW (32
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notic e.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
Notes Notes
Note:
Component and circuit are subject to modification to insure best operation
under differing local conditions. This manual is based on Europe (E) standard,
and provides information on regional circuit modification through use of alter-
nate schematic diagrams, and information on regional component variations
through use of parts list.
PARTS LIST / SPECIFICATIONS
(Wave length 660 nm)
[ Audio ] (for DPF-2010/1010)
Frequency response ...................................... 6 Hz ~ 20 kHz, 0.5 dB
Signal to noise ratio ............................................... More than 94 dB
Dynamic range ....................................................... More than 92 dB
Total harmonic distortion + noise ..... Less than 0.007% (at 1 kHz)
Channel separation ............................... More than 90 dB (at 1 kHz)
Wow & flutter ................................................... Unmeasurable Limit
Output level/impedance
V ariable (only DPF-2010)
(only DPF-1010)
Fixed
Digital output (only DPF-2010)
Optical ........................................................–15 dBm – –21 dBm
[ General ]
Power consumption
Australia, Europe and U.K.
Other countries .....................................................................
Dimensions ................................................... W : 440 mm (17-5/16")
)
Weight (Net) ................................................................. 4.3 kg (9.5 lb)
14-6,Dogenzaka 1-chome, Shibuya-ku, Tokyo, 150-8501 Japan
KENWOOD SERVICE CORPORATION
P.O BOX 22745, 2201 East Dominguez St., Long Beach, CA 90801-5745, U.S.A.
.................. (Max.) 2.0 V/0.8 k
..............................
2.0 V/0.8 k
(Wave length 660 nm)
.................................................. 12 W
14 W
H : 95 mm (3-3/4")
D : 370 mm (14-9/16")