Sony CDP-CX300 Service Manual page 16

Sensor Adjustment
1. With the power ON, while pressing the GROUP 4 and ·
buttons, press the +100 button to enter the mechanism adjust-
ment mode.
2. Press the GROUP 1 button to operate the loading mechanism,
and continue pressing until the disc table locks. (Fig-3)
3. Loosen the fixing screw, move the holder (TABLE SENSOR)
slightly, and when the LED (green) of the PLAY button switches
to the LED (orange) of the PAUSE button (or vice versa), se-
cure the holder (TABLE SENSOR). (Fig-4)
4. Moving the disc table right and left with a hand after the screw
is fixed, the table will move by the play of a disc table. If the
LEDs light up alternately, the adjustment will be performed cor-
rectly. (Fig-4)
Linked with P indicator
Linked with · indicator
PLAY indicator PAUSE indicator
Fixed screws
Table assembly
– 16 –
GROUP1
PAUSE button
GROUP4
PLAY button
At this position,this
part will be locked.
FIg-3
Holder (table sensor)
Swing
FIg-4