Extending Volumes - Buffalo TeraStation III iSCSI TS-IXL User Manual

Extending Volumes

Volume space can be extended after you create the volume.
Notes:
• Extending the volume may delete all data on the volume with some file systems. Before extending the volume, back
up any important data on the volume.
• LVM must be enabled in order to extend volumes. Refer to page 14.
1
2
3
4
5
Click Save at the bottom of the screen.
6
Turn iSCSI Service back on.
Note:
To start iSCSI service for the target volume only, navigate to iSCSI Volumes - iSCSI Volumes, select the target
volume, and click Activate.
You have now extended the size of a volume.
Note:
Your OS may not detect extended volumes. In this case, reinitialize and reformat the extended volume before use.
TeraStation III iSCSI User Manual
Turn off iSCSI Service on the left side of Settings.
Note:
To stop iSCSI service for the target volume only, navigate to
iSCSI Volumes - iSCSI Volumes, select the target volume, and click
Inactivate.
Navigate to iSCSI Volumes - iSCSI Volumes.
Click the volume you want to extend.
1 Check the Enlarge Size box.
2 Enter the amount of space to increment the volume in GB.
16