How To Play Media - Kenwood DNN990HD Quick Start Manual

Return to the Top page
Basic Operations
ñ
H
ow to Play Media
Music CD and disc media
DNN990HD
1
Press the <G> button.
HOME 6
The panel opens.
2
Insert the disc into the slot.
The panel closes automatically.
The unit loads the disc and playback
starts.
ö To eject the disc:
Press the <G> button.
DNN770HD
1
Insert the disc into the slot.
The unit loads the disc and playback
starts.
20
ö To eject the disc:
Press the <0> button.
HOME
USB device
1
Connect the USB device with the
USB cable.
TEL
6
The unit reads the device and playback
starts.
ö To disconnect the device:
Touch [G] on the screen and disconnect
the device from the cable.
iPod
1
Connect the iPod with the iPod
cable.
The unit reads the iPod and playback
starts.
ö To disconnect the device:
Touch [ ] on the screen and then touch
[G]. Disconnect the iPod from the cable.
SD card
DNN990HD
1
Press the <G> button for 1 second
to open the front panel.
0
The panel fully opens.
2
Hold the SD card as the diagram
below and insert it into the slot
until it clicks.
Notched section
Labeled side
The unit loads the card and playback
starts.
ö To remove:
Push the SD card until it clicks and then
remove your finger from the card.
The card pops up so that you can pull it
out with your fingers.
Return to the Top page
Basic Operations
DNN770HD
1
Open the microSD card slot cover
as the illustration in the right.
2
Hold the microSD card with the
label facing up and the notched
section right, and insert it into the
slot until it clicks.
The unit loads the card and playback
starts.
ö To remove:
Push the microSD card until it clicks and
then remove your finger from the card.
The card pops up so that you can pull it
out with your fingers.
21