Cycle Force Group +BikeAid Owner's Manual
  1. Manuals
  2. Brands
  3. Cycle Force Group Manuals
  4. Bicycle
  5. +BikeAid
  6. Owner's manual

Cycle Force Group +BikeAid Owner's Manual

Bicycle
Hide thumbs
Table of Contents

Advertisement

Quick Links

Meijer.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the +BikeAid and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Cycle Force Group +BikeAid

Summary of Contents for Cycle Force Group +BikeAid

  • Page 1 Meijer.com...
  • Page 2 Meijer.com CONGRATULATIONS ON YOUR NEW BIKE! Cycle Force Group is dedicated to making sure you are satisfied with your new bicycle and wants to help with any questions or comments you may have. VISIT US AT: WWW.CYCLEFG.COM FOR CUSTOMER SERVICE VISIT: WWW.BIKEAIDONLINE.COM...
  • Page 3 Meijer.com PLEASE RETAIN YOUR SALES RECEIPT AS PROOF OF PURCHASE NOTES: _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________...
  • Page 4 The following manual is only a guide to assist you and is not a complete or comprehensive manual of all aspects of maintaining and repairing your bicycle. The bicycle that you have purchased is a complex object. Cycle Force Group recommends that you consult a bicycle specialist if you have doubts or concerns as to your experience or ability to properly assemble, repair, or maintain your bicycle.

  • Page 5: Parts Identification

    SECTIONS Meijer.com PART 1 PARTS IDENTIFICATION PART 2 BEFORE YOU RIDE ASSEMBLY PART 3 SERVICING PART 4 DETAILED MAINTENANCE PART 5...

  • Page 6: Table Of Contents

    Meijer.com Getting Started Wheel Inspection Inspection PARTS IDENTIFICATION Handlebars Tire Inspection FREEWHEEL CRUISER/ROAD BICYCLES Forks Recommended Tire Pressures: Inspection MOUNTAIN/BMX BICYCLES Seat and Seat Post Hub Bearing Adjustment Lubrication TOOLS REQUIRED Pedals & Cranks Set How To Fix a Flat Tire COASTER HUB Front Wheel HANDLEBARS AND STEM...
  • Page 7 Meijer.com CRUISER BICYCLE Cruiser bicycles also known as beach cruisers are designed for comfort and style. Handlebar Grip Shifter Handlebars Brake Lever Brake Control Cables Top Tube Seat Seat Post Handlebar Stem Quick Release Head Set Seat stays Fenders Head Tube Down Tube Spokes Front Brake...
  • Page 8 Meijer.com ROAD BICYCLE Road bicycles are designed for racing and exercise. It can be valued as a commuter if long distance or speed is required. Road bicycles use narrow, high-pressured tires to decrease rolling resistance and equipped with drop handlebars. Seat Seat Post Handlebar Stem...
  • Page 9 Meijer.com MOUNTAIN BICYCLE Mountain bicycles are designed to give maximum comfort over a wide variety of road surfaces. The wider handlebars and convenient shift lever position make them very easy to control. Wider rims and tires give them a softer ride with more traction on rough surfaces. The frame and fork on mountain style bicycles are much sturdier than those on racing style bicycles.
  • Page 10 Meijer.com BMX BICYCLE BMX style bicycles are a popular general purpose type most suited for young riders. They are valued because of their sturdy and simple construction, and low maintenance. Brake Lever Handlebar Seat Handlebar Grip Brake Control Cable Seat Post Handlebar Stem Seat Post Binder Bolt Head Set...

  • Page 11: Tools Required

    If you need replacement parts or have any questions pertaining to assembly of your bicycle, call Cycle Force Group Bicycles direct at: CYCLE FORCE GROUP BICYCLES SERVICE AND TECHNICAL SUPPORT: 1-877-245-3243 Monday –...
  • Page 12 Meijer.com...

  • Page 13: Correct Frame Size

    Meijer.com CORRECT FRAME SIZE When selecting a new bicycle, the correct choice of frame size is a very important safety consideration. Most full sized bicycles come in a range of frame sizes. These sizes usually refer to the distance between the center of the bottom bracket and the top of the frame seat tube.

  • Page 14: Riding Position

    Meijer.com RIDING POSITION Saddle Height In order to obtain the most comfortable riding position and offer the best possible pedaling efficiency, the seat height should be set correctly in relation to the rider’s leg length. The correct saddle height should not allow leg strain from over extension, and the hips should not rock from side to side while pedaling.

  • Page 15: Handlebar Height

    Meijer.com Handlebar Height Maximum comfort is usually obtained when the handlebar height is equal to Stem Wedge Bolt the height of the seat. You may wish to try different heights to find the most comfortable position. Handlebar Binder Bolt Maximum Height/ Minimum Insertion Mark Exceeds 2 1/2...

  • Page 16: Safety Checklist

    Meijer.com SAFETY CHECKLIST Before every ride, it is important to carry out the following safety checks: 1. Brakes – Ensure front and rear brakes work properly. – Ensure brake shoe pads are not over worn and are correctly positioned in relation to the rims. –...

  • Page 17: Bearings

    Meijer.com 5. Bearings – Ensure all bearings are lubricated, run freely and display no excess movement, grinding or rattling. – Check headset, wheel bearings, pedal bearings and bottom bracket bearings. 6. Cranks and Pedals – Ensure pedals are securely tightened to the cranks. –...

  • Page 18: Helmets

    Meijer.com Helmets It is strongly advised that a properly fitting, ANSI or SNELL approved, bicycle safety helmet be worn at all times when riding your bicycle. In addition, if you are carrying a passenger in a child safety seat, they must also be wearing a helmet.

  • Page 19: Riding Safely

    Meijer.com RIDING SAFELY General Rules When riding obey the same road laws as all other road vehicles, including giving way to pedestrians, and stopping at red lights and stop signs. For further information, contact the Road Traffic Authority in your State. Ride predictably and in a straight line.

  • Page 20: Wet Weather

    Meijer.com Wet Weather – In wet weather you need to take extra care. – Brake earlier, you will take a longer distance to stop. – Decrease your riding speed, avoid sudden braking, and take corners with additional caution. – Be more visible on the road. –...

  • Page 21: Hill Technique

    Meijer.com Hill Technique – Gear down before a climb and continue gearing down as required to maintain pedaling speed. – If you reach the lowest gear and are struggling, stand up on your pedals. You will then obtain more power from each pedal revolution.

  • Page 22: Gears - How To Operate

    Meijer.com GEARS - HOW TO OPERATE Derailleur Control Cable Freewheel Front Derailleur Cogs Derailleur Gears Most multi-speed bicycles today are equipped with what are known as derailleur gears. They operate using a system of levers and mechanisms to move the drive chain between different sized driving gears or cogs. The purpose of gears is to let you maintain a constant, steady pedaling pace under varying conditions.
  • Page 23 Meijer.com For optimal performance, For optimal performance, High Middle High NOT RECOMMENDED NOT RECOMMENDED Recommended Chainwheel/Rear Sprocket Gear Combinations Hand Twist Shifters Front Low Gear Rear Low Gear Some bicycles are now being equipped with a shifting mechanism called Twist Shift, which is built into the handlebar grips and does not make use of separate levers.

  • Page 24: Below The Bar Shifters

    Meijer.com Thumb shifters (Top Mounted) Left hand lever Right hand lever Most mountain style bicycles are equipped with shifters mounted on the top of the handlebars and operated by the thumbs. To select a lower, easier gear, shift to a bigger rear cog and a small chainwheel. Pull the left shifter back to operate the derailleur.

  • Page 25: Bicycle Care

    Meijer.com BICYCLE CARE Basic Maintenance The following procedures will help you maintain your bicycle for years of enjoyable riding. For painted frame, dust the surface and remove any loose dirt with a dry cloth. To clean, wipe with a damp cloth soaked in a mild detergent mixture.

  • Page 26: Storage

    Meijer.com Storage Keep your bicycle in a dry location away from the weather and the sun. Ultraviolet rays may cause paint to fade or rubber and plastic parts to crack. Before storing your bicycle for a long period of time, clean and lubricate all components and wax the frame.

  • Page 27: Derailleur Geared Bicycles

    Meijer.com DERAILLEUR GEARED BICYCLES Getting Started Open the carton from the top and remove the bicycle. Remove the straps Includes 20”, 24”, 26” Wheel Mountain Bikes and protective wrapping from the bicycle. Inspect the bicycle and all Assembly is the same for men and women’s bikes. accessories and parts for possible shortages.
  • Page 28 Meijer.com Shifter binder bolt (2.5 Allen key) Brake lever binder bolt (5mm Allen key) Bar end (5mm Allen key) Tighten all bolts that clamp the shifters, brakes levers, and bar end to the handlebar using a 5mm Allen key or Phillips head screwdriver. (Figure 1) Handlebar with Twist Shifter.

  • Page 29: Forks

    Meijer.com Forks Steering Tube There are two different types of forks that range in styles and dimensions. Brake Boss One type is a rigid fork (Figure 1) consisting of stationary tubing with curved blades. The other type is a suspension fork (Figure 2) consisting of stanchion tubes riding on elastomers or springs inside of a straight fork Drop-out leg.

  • Page 30: Seat And Seat Post

    Meijer.com Seat and Seat Post Attach the seat to the seat post by inserting the smaller end of the seat post into the seat clamp and tighten. Insert the larger end of the seat post into the seat tube of the bicycle frame observing the minimum insertion mark on Seat the seat post.

  • Page 31: Pedals & Cranks Set

    Meijer.com Pedals & Crank Set Look for the letters “R” for right, and “L” for left, stamped on each pedal spindle. Start each pedal spindle by hand to avoid stripping the threads. Tighten with a 15mm narrow open-ended wrench. Note that the right hand pedal attaches to the chainwheel side crank arm with a right-hand (clockwise) thread.

  • Page 32: Front Wheel

    Meijer.com Front Wheel Quick Release Adjusting Axle Quick Release Check the wheel hub before attaching in to the fork by rotating the threaded Lever axle. It should be smooth with no lateral movement. Insert the front wheel into the fork dropouts. Tighten the wheel nuts using the appropriate 14mm or 15mm wrench.

  • Page 33: Front Brake

    curved part of the lever faces the bicycle. Meijer.com 5. The wheel is tightly secured when the serrated surfaces of the quick release clamping parts actually begin to cut into the bicycle frame/fork surfaces. 6. Note that the same procedure applies when operating a quick release seat post binder mechanism.
  • Page 34 Meijer.com 3. Temporarily tighten the cable so 5. Secure one of the shoes at a time. that the link wire is at the position in The adjustment of the shoe clearance is the illustration. not necessary at this time. Shoe fixing nut tightening torque: 7.84 - 8.82 Nm (70 - 78 in.

  • Page 35: Cantilever Brakes – Straddle Cable

    Meijer.com Cantilever Brakes – Straddle Cable Straddle The length of the straddle cable, the height of the straddle hanger and Cable Brake Brake Cable the brake pad-to-caliper arm position all have an effect on braking power. Generally, the straddle cable should be high enough, however, Straddle Hanger to adequately clear the tire (and any debris that may stick to the tire) or Pinch Bolt...
  • Page 36 Meijer.com V - Brake While holding the shoe against the rim, adjust the amount of shoe protrusion by interchanging the position of the B washers (i.e. 6 mm and 3 mm) so that If fitted with V-Brakes, insert the brake body into dimension A is kept at 39 mm or more.
  • Page 37 Meijer.com While holding the shoe against the Adjust the balance with the spring rim, tighten the shoe fixing nut. tension adjustment screws. shoe fixing nut 5 mm Allen key 1 mm 1 mm 1 mm Spring tension Spring tension adjustment screw adjustment screw Pass the inner cable through the inner Depress the brake lever about 10 times as...

  • Page 38: Check Your Brakes

    Meijer.com Check your Brakes Press each brake lever to make sure that there is no binding and that the brake pads press hard enough on the rims to stop the bike. The brake pads should be adjusted so they are 1mm to 2mm away from the rim when the brakes are not applied. Brake pads should be centered on the rim and the rear portion of each brake pad should be about 0.5 –...

  • Page 39: Disk Brakes

    Meijer.com Disk Brakes Brake Cable If fitted with a front disc brake, the components should already be Housing attached. However, please check all connections before attempting to ride Barrel Adjuster the bicycle. Secure tightly the 6 bolts that hold the disc to the front wheel Lock Nut hub and the 2 bolts that hold the brake mechanism to the fork.
  • Page 40 Meijer.com Centering Bolt Fork Leg Disc Mounting Bolts Brake Cable Housing Rotating Caliper Body Disc Cable Boot with Spring inside Centering Bolt (inside) Actuating Cable Anchor Bolt Fork Drop Out Caliper Mounting Quick Release Bolts with spacers lever These brakes require breaking in! Ride and use the brakes gently for 13 miles before using the brakes in downhill conditions, for sudden stops, or any other serious braking.

  • Page 41: Derailleur

    Meijer.com DERAILLEUR Freewheel Outer side of Top Gear Although the front and rear derailleurs are initially adjusted at the factory, you will need to inspect and readjust both prior to riding the bicycle. Pulley Adjustment Screw Rear Derailleur Begin by shifting the rear shifter to largest number indicated, disconnect the cable from the rear derailleur cable anchor bolt, and place the chain on the smallest sprocket.

  • Page 42: Front Derailleur

    Meijer.com Front Derailleur Low Adjusting Screw Shift both shifters to the smallest number indicated and place the chain High Adjusting on the corresponding cog and chainwheel. Disconnect the front derailleur Cable Anchor Bolt Screw cable from the cable anchor bolt. Check the position of the front derailleur; it should be parallel with the outer chainwheel and clear the largest chainwheel by 3-5mm when fully engaged.

  • Page 43: Dual Suspension

    Meijer.com Dual Suspension Dual suspension bikes are equipped with a front fork as well as a rear suspension generally located below the seat. The piston works in conjunction with a spring to allow the bike to rotate on a pivot point. Ensure all attaching hardware is secured and there is no lateral movement of the rear triangle.

  • Page 44: Rear Pivots

    Meijer.com Rear Pivots The pivots assembly is a simple mechanism that allows the rear triangle to move up and down in combination with a rear suspension. Size, shape, and compounds will vary between models; however, operating principles 1.Attaching Bolt are the same. A shaft will pivot inside of two bushings secured in place 2.Bushing with bolts.

  • Page 45: Accessories

    Meijer.com Accessories Saddle Bag If your bike is supplied with a water bottle and cage, attach the cage to the bicycle using the Allen bolts provided. Frame Bag Some bikes come equipped with a saddlebag or frame bag. The Reflector saddlebag installs under the seat with the zipper facing the rear wheel.

  • Page 46: Final Check

    Meijer.com Final Check After all adjustments have been made, shift through every gear several times at varying speeds. This will ensure all your adjustments are correct and will allow you to pinpoint any trouble areas. If you encounter any problems, refer to the appropriate section and make any necessary adjustments.

  • Page 47: Single Speed & Bmx

    Meijer.com SINGLE SPEED & BMX Foreword: Assembling a bicycle is an important responsibility. Proper assembly not only gives the rider more enjoyment of the bicycle; it also Includes 16” and 20” BMX Bikes offers an important measure of safety. Assembly is the same for boy and girl’s bikes. Getting Started Open the carton from the top and remove the bicycle.

  • Page 48: Seat

    Meijer.com Seat Loosen nut on the seat clamp and add 3 or 4 drops of oil onto the threads of the bolt. Place the smaller end of the seat post into the seat clamp until it stops with the bolt to the rear of the seat post. Thread the nut on the seat clamp loosely.

  • Page 49: Front Wheel

    Meijer.com Front Wheel Retaining Washer 1. Make sure the brakes are loose enough to allow the wheel to pass Axle Nut through the brake pads easily. Axle 2. Place wheel into fork drop outs 3. Install retaining washers with raised lip pointed towards the fork, and insert into the small hole of the fork blade.
  • Page 50 Meijer.com U-Brake 1. Install the left brake arm onto pivot on the frame, assemble washer (C) and the inner hex fixing bolt(A) without fastening them tightly. Repeat the same procedure to assemble the right arm. 2. Position the brake pads and make sure they match well with th rim. Fixing Nut (B) 3.

  • Page 51: Side Pull Brake

    Meijer.com Side Pull Brake Side Pull Cable Loosen the cable anchor nut and thread the brake cable through it. Brakes Adjusting Barrel Tighten the nut by hand until it holds the cable in place. Squeeze the brake arms together against the rim of the wheel. Loosen the nuts on the Center Bolt brake shoes and turn until they match the angle of the rim.
  • Page 52 Meijer.com 3. Temporarily tighten the cable so 5. Secure one of the shoes at a time. that the link wire is at the position in The adjustment of the shoe clearance is the illustration. not necessary at this time. Shoe fixing nut tightening torque: Link Wire 10 mm wrench To u c h i n g...
  • Page 53 Meijer.com V - Brake While holding the shoe against the rim, adjust the amount of shoe protrusion by interchanging the position of the B washers (i.e. 6 mm and 3 mm) so that If fitted with V-Brakes, insert the brake body into dimension A is kept at 39 mm or more.
  • Page 54 Meijer.com While holding the shoe against the Adjust the balance with the spring rim, tighten the shoe fixing nut. tension adjustment screws. shoe fixing nut 5 mm Allen key 1 mm 1 mm 1 mm Spring tension Spring tension adjustment screw adjustment screw Pass the inner cable through the inner Depress the brake lever about 10 times as...

  • Page 55: Cantilever Brakes – Straddle Cable

    Meijer.com Cantilever Brakes – Straddle Cable Straddle The length of the straddle cable, the height of the straddle hanger and Cable Brake Brake Cable the brake pad-to-caliper arm position all have an effect on braking power. Generally, the straddle cable bridge is set low and close to the Straddle Hanger tire for maximum braking force.

  • Page 56: Training Wheels

    Meijer.com Check your Brakes Press each brake lever to make sure that there is no binding and that brake pads press hard enough on the rims to stop the bike. The brake pads should be adjusted so they are 1mm to 2mm away from the rim when the brakes are not applied. Brake pads should be centered on the rim and the rear portion of each brake pad should be about 0.5 –...

  • Page 57: Rotors

    2. Screw the adjusting barrels in the upper plate in (or out) to set Meijer.com Rotors the bearing for maximum travel. The bearing should be as Some freestyle BMX bicycles come equipped with a detangler far down as it can go without resting on the lower plate or the system that will allow the handlebar to spin 360-degrees without adjusting barrels screwed into the lower plate.
  • Page 58 Meijer.com Failure to adjust correctly may result in loss of braking power and personal injury. Single Cable Casing Cable Adjuster Cable Splitter Upper Cable Barrel End (long casing) Upper Cable (short casing) Adjusting Barrel Locknut Upper Plate Set for Max. Travel Keyed Washer 37mm + or - 1mm Bearing...

  • Page 59: Final Check

    Meijer.com Final Check Pads Install any additional parts that are supplied with your bike. NOTE: Your bicycle may be equipped with different style components than the ones illustrated. Reflectors: Attach the white reflector to the front bracket and the red reflector to the rear bracket using a 8mm wrench or a Phillips head screwdriver.
  • Page 60 Meijer.com...

  • Page 61: Routine Maintenance

    Meijer.com ROUTINE MAINTENANCE Correct routine maintenance of your new bike will ensure: Smooth running – Longer lasting components – Safer riding – Lower running costs Every time you ride your bicycle, its condition changes. The more you ride, the more frequently maintenance will be required. We recommend you spend a little time on regular maintenance tasks.

  • Page 62: Schedule 2 - Service Checklist

    Meijer.com Schedule 2 - Service Checklist Frequency Task Page Reference Before every ride Check tire pressure Check brake operation 74-77 Check wheels for loose spokes Make sure nothing is loose After every ride Quick wipe down with damp cloth 22-23 Weekly Lubrication as per schedule 1 Monthly...

  • Page 63: Travel Tools

    Meijer.com Tools Required 1. Open ended wrench or ring wrenches: 8mm, 9mm, 10mm, 12mm, 13mm, 14mm, 15mm 2. Open end or pedal wrench 15mm 3. Allen key wrenches: 4mm, 5mm, 6mm, 8mm 4. Adjustable wrench 5. Standard flat head screwdriver 6.
  • Page 64 Meijer.com...

  • Page 65: Wheels And Tires

    Meijer.com WHEELS AND TIRES Wheel Inspection It is most important that wheels are kept in top condition. Properly maintaining your bicycle’s wheels will help braking performance and stability when riding. Be aware of the following potential problems: Dirty or greasy rims: Caution: These can render your brake ineffective.

  • Page 66: Tire Inspection

    Meijer.com Tire Inspection Tires must be maintained properly to ensure road holding and stability. Check the following areas: Inflation: Ensure tires are inflated to the pressure indicated on the tire sidewalls. It is better to use a tire gauge and a hand pump than a service station pump.

  • Page 67: Hub Bearing Adjustment

    Meijer.com Hub Bearing Adjustment Ball Bearings When checked, the hub bearings of either wheel will require adjustment if Bearing Lock there is any more than slight side play. Cone Washer Hub Body 1. Check to make sure neither locknut is loose. 2.
  • Page 68 Meijer.com are no protruding spokes, rust or other potential causes. Replace the rim tape, which covers the spoke ends, if damaged. 8. Remount one side of the tire onto the rim. 9. Using a hand pump, inflate the tube just enough to give in some shape. 10.

  • Page 69: Warning

    Meijer.com HANDLEBARS AND STEM Handlebar Stem The handlebar stem fits into the steering column and is held firm by the action of a binder bolt and expander wedge which, when tightened, binds with the inside of the fork steerer tube. When removing the stem, loosen the stem bolt two or three turns;...

  • Page 70: Handlebars

    When refitting the stem, make sure the handlebars are correctly aligned and Meijer.com tightened using the appropriate hex wrench or Allen key. Grip Do not over-tighten. Test the security of the handlebar within the stem, and the stem with the fork Stem Wedge Bolt Handlebar steerer tube, by clamping the front wheel between your knees and trying...

  • Page 71: Twist Shifters

    Meijer.com Grip 7/8 Plastic Washer Barrel Adjuster Cable TWIST SHIFTERS Twist Shift – Installation 1. Slide front twist shift assembly over left side of handlebar leaving proper clearance for handlebar grip. If necessary, move the brake lever to accommodate twist shift and handlebar grip. 2.
  • Page 72 Meijer.com Cables and Cable Housing Cables and housing are one of the most overlooked parts on the bicycle. The first indication that your cables and housing need to be replaced is an increased amount of pressure needed to operate the brakes or shifters. Before every ride, check that there are no kinks or frays in the cables and housing.

  • Page 73: Headset

    Meijer.com HEADSET Standard Headset Inspection The headset bearing adjustment should be checked every month. This is important, as it is the headset that locks the fork into the frame, and if Lock Nut loose, can cause damage or result in an accident. While standing over the frame top tube with both feet on the ground, apply the front brake firmly and rock the bicycle back and forth;...

  • Page 74: Suspension Fork

    Meijer.com SUSPENSION FORK Some fork models differ from the one illustrated. Those models are not adjustable and require no maintenance other than keeping it free from dirt and grime. Regular Maintenance The following maintenance should be performed every month (if riding off-road) or whenever you feel performance is deteriorating.

  • Page 75: Saddle And Seat Post

    Meijer.com SADDLE AND SEAT POST Inspection The seat fixing bolt and the seat post binder bolt should be checked for tightness and adjustment every month. On removing the seat post from the frame, you will notice a mark about 65mm up from the bottom with the words “max.

  • Page 76: Adjustment

    Meijer.com Adjustment As mentioned in Part 2, the seat can be adjusted in height, angle and distance from the handlebar to suit the individual rider. Saddle angle is a matter of personal preference but the most comfortable position will usually be found when the top of the seat is almost parallel to the ground, or slightly raised at the front.

  • Page 77: Brakes

    Meijer.com Brakes The correct adjustment and operation of your bicycle’s brakes is extremely important for safe operation. Brakes should be checked for effective operation before every ride. Frequent checking of adjustment is necessary as the control cables will stretch and the brake pads will become worn with use.

  • Page 78: Lubrication

    Meijer.com Some brakes have a quick release mechanism to allow easier wheel removal. Whenever you adjust he brakes make sure that quick release mechanism is in the closed position. Never ride unless the quick release is firmly locked in the Cable Adjusting Barrel closed position.

  • Page 79: Adjustment – Cantilever Calipers

    Meijer.com Some brakes have a special mechanism that enables you to set the clearance on either side of the rim using a screwdriver. Brake pads should finally be adjusted so that the leading edge of the pad makes first contact with the rim. Some brakes have special curved washers to allow this, but on less complex models it will be necessary to apply a little force to the pad and its mounting.
  • Page 80 Meijer.com On some newer type cantilever brakes, the main brake cable continues Tread Tread Worn Off through the central cable carrier to an anchor bolt on one of the brake arms. A shorter link cable reaches form the carrier and the hook on the other brake arm.

  • Page 81: Drivetrain

    Meijer.com DRIVETRAIN The drivetrain of a bicycle refers to all parts that transmit power to the rear wheel including the pedals, chain, chainwheel, crank set, and freewheel. Pedals Pedals are available in a variety of shapes, sizes and materials, and each are designed with a particular purpose in mind.

  • Page 82: Attachment

    Meijer.com Lubrication and Adjustment Many pedals cannot be disassembled to allow access to the internal bearings and axle. However, it is usually possible to inject a little oil onto the inside bearings, and this should be done every six months. If the pedal is the type that can be fully disassembled, then the bearings should be removed, cleaned and greased every six to twelve months.

  • Page 83: Crank Set

    Meijer.com CRANK SET The crank set refers to the bottom bracket axle and bearing, the crank arms, and chainrings. Your bike may be fitted with either a one piece crank, where the crank arms and bottom bracket are single component, or cotterless cranks, where the crank arms bolt onto the bottom bracket axle without using old fashioned type cotterpins.

  • Page 84: Lubrication And Adjustment – One Piece Cranks

    Meijer.com Lubrication and Adjustment – One Piece Cranks To adjust the free play in a one piece type bottom bracket, loosen the locknut on the left side by turning in clockwise and tighten the adjusting cone counter-clockwise using a screwdriver in the slot. When correctly adjusted, re-tighten the locknut counter-clockwise. To disassemble: 1.

  • Page 85: Lubrication And Adjustment – Cotterless Cranks

    Meijer.com Lubrication and Adjustment – Cotterless Cranks To adjust the free play in a three piece type bottom bracket, loosen the Bottom Bracket lockring on the left side by turning in counter-clockwise, then turn the adjusting cup as required. Re-tighten the lockring taking care not to alter the cup adjustment.
  • Page 86 Meijer.com Screw in the removal tool. Adjustment After Use: 1. Remove dust cap. 2. Tap the crank arm lightly with a mallet. Turn the screw bolt clockwise. 3. Retighten the flange nuts, and refit the dust caps. Position the crank on the axle. Lightly tap the crank onto the axle.

  • Page 87: Adjustment And Replacement

    Meijer.com Chain Rear Sprocket Front Chainwheel Inspection The chain must be kept clean, rust fee and frequently lubricated in Pull up order to extend its life as long as possible. It will require replacement if the stretches, breaks, or causes inefficient gear shifting. Make sure that there are no stiff links, the must all move freely.

  • Page 88: Inspection

    Meijer.com Derailleur geared bicycles use narrower chains and require a special tool to fit and remove chain links, or to change the length. To remove, fit the rivet tool so that the punch pin is centered over any one of the chain rivets. Push the rivet almost all the way out, then back out the punch and remove the tool.

  • Page 89: Lubrication

    Meijer.com Lubrication Brake Arm Clip Remove any accumulated dirt from the freewheel with a brush and a degreaser. Disassembly of the freewheel is a complicated procedure Brake Arm requiring special tools, and should be left to a specialist. Apply oil to the Sprocket freewheel whenever you lubricate that chain, taking care to wipe off any excess.

  • Page 90: Inspection

    Meijer.com DERAILLEUR SYSTEMS The derailleur system includes the front and rear derailleurs, the shift levers, and the derailleur control cables, all of which must function correctly for smooth gear shifting to occur. There are several different types of derailleur systems but all operate using similar principles. Your new bicycle may be fitted with a standard ‘friction’...

  • Page 91: Adjustment – Rear Derailleur

    Meijer.com Lubrication Outer side of Top Gear Freewheel All the pivoting points of the front and rear derailleurs should be lubricated Pulley Adjustment with light oil at least every month. Be sure to wipe off any excess oil to Screw prevent attraction of dirt into the mechanisms.

  • Page 92: Adjustment – Front Derailleur 8

    Meijer.com Adjustment – Front Derailleur Low Adjusting Screw 1. Shift the rear shifter to the smallest number indicated, then shift the front High Adjusting shifter to the smallest number indicated. Disconnect the front derailleur Cable Fixing Bolt Screw cable from the cable anchor bolt and place the chain on the smallest chainwheel.
  • Page 93 QUICK RELEASE LEVERS Meijer.com It is important to check the quick release levers before every ride to ensure all connections are made properly and securely. Periodically, disassemble the mechanism from the bicycle and inspect for any wear or damage and replace if necessary. When re-installing, it is very important to ensure the connections are made properly.
  • Page 94 Meijer.com Peg Setting Install peg on axle and use a screw driver to tighten peg securely.
  • Page 95 Meijer.com Problem Possible Cause Remedy Gear shifts not working properly Derailleur cables sticking/stretched/ Lubricate/tighten/replace cables damaged Front or rear derailleur not adjusted Adjust derailleurs properly Indexed shifting not adjusted properly Adjust indexing Slipping chain Excessively worn/chipped chainring or Replace chainring, sprockets and freewheel sprocket teeth chain Chain worn/stretched...
  • Page 96 Meijer.com Problem Possible Cause Remedy Freewheel does not rotate Freewheel internal pawl pins are Lubricate. If problem persists, replace jammed freehweel Brakes not working effectively Brake blocks worn down Replace brake blocks Brake blocks/rim greasy, wet or dirty Clean blocks and rim Brake cables are binding/stretched/ Clean/adjust/replace cables damaged...
  • Page 97 Meijer.com Problem Possible Cause Remedy Steering not accurate Wheels not aligned in frame Align wheels correctly Headset loose or binding Adjust/tighten headset Front forks or frame bent Take bike to a bike shop for possible frame realignment Frequent punctures Inner tube old or faulty Replace inner tube Tire tread/casing worn Replace tire...
  • Page 98 Meijer.com You can also register your bicycle with Cycle Force Group at www.cyclefg.com Purchase Record Card Fill in Immediately and retain as a record of your purchase. *Please retain your sales receipt for any possible warranty claims. Your Name: ____________________________________________________________________________________________________________...
  • Page 99 What Cycle Force Group will do: other warranties, written or implied. In the event of a defective bicycle part, Cycle Force Group will, at its option, repair or replace D) No modifications of this warranty are authorized. There are no promises, terms, the defective bicycle or part within warranty period, at no cost to you except for shipping and conditions, or warranties other than those contained herein.
  • Page 100 Meijer.com www.cyclefg.com...

This manual is also suitable for:

CruiserRoadMountainBmx

Table of Contents