11 - 20 LI4278 Product Reference Guide
EAN-8/JAN-8 Extend
Parameter # 27h
Enable this parameter to add five leading zeros to decoded EAN-8 symbols to make them compatible in format
to EAN-13 symbols.
Disable this to transmit EAN-8 symbols as is.
Enable EAN/JAN Zero Extend
Bookland ISBN Format
Parameter # F1h 40h
If you enabled Bookland EAN using
formats for Bookland data:
•
Bookland ISBN-10 - The linear imager scanner reports Bookland data starting with 978 in traditional
10-digit format with the special Bookland check digit for backward-compatibility. Data starting with 979 is
not considered Bookland in this mode.
•
Bookland ISBN-13 - The linear imager scanner reports Bookland data (starting with either 978 or 979)
as EAN-13 in 13-digit format to meet the 2007 ISBN-13 protocol.
*
Bookland ISBN-10
NOTE For Bookland EAN to function properly, first enable Bookland EAN using
on page
Supplementals, or Enable 978/979 Supplemental Mode in
page
(01h)
Enable/Disable Bookland EAN on page
(00h)
11-8, then select either Decode UPC/EAN Supplementals, Autodiscriminate UPC/EAN
11-9.
*
Disable EAN/JAN Zero Extend
(00h)
11-8, select one of the following
Bookland ISBN-13
(01h)
Enable/Disable Bookland EAN
Decode UPC/EAN/JAN Supplementals on