Operation; Using The T 535 - General Setup Menu; General Setup Menu; Dvd-Audio Mode - NAD T 535 Owner's Manual

OPERATION

USING THE T 535 – GENERAL SETUP MENU
The Setup Menu allows one to customize the operation of the T 535. If the
factory defaults do not suit your taste, you will need to use the setup menu
to configure the T 535 yourself.
To access and navigate through the Setup Menu selections, please refer to
and follow the directions stated in the above section about "Navigating the
Setup Menu OSD and Making Changes. "

GENERAL SETUP MENU

DVD-AUDIO MODE

Some DVD-Audio discs contain the DVD-Video content in addition to the
DVD-Audio content. You can choose DVD-Audio or DVD-Video mode by
scrolling to [DVD-Audio mode].
DVD-AUDIO : Select to playback both DVD-Audio and DVD-Video
contents. DVD-Audio content only may be played back depending on
the disc.
DVD-Video : Select to playback only the DVD-Video content.
NOTES
• This setting is only available when no disc is loaded in the disc tray.
• Selected mode becomes effective after you close the setup menu.
• When a DVD-Audio disc is played back, the DVD AUDIO indicator lights
up.
• When you select [DVD-Video], the DVD AUDIO indicator goes out.
MOVING TO ANOTHER GROUP
Some DVD Audio discs divide content into different groups. Your player
enables you to quickly access different groups during playback via the
on-screen display.
1. Press DISP during playback
2. Press to highlight [GROUP].
3. Enter group number using the numeric buttons 0-9.
12

SACD MODE

Some SACD discs contain both SACD layer and the standard CD layer. You
can choose SACD or CD mode by scrolling to [SACD mode].
SACD : Select to play back SACD layer only.
Press [STOP] and then toggle DVD 9's [MULTI/2CH] key to directly select
either multi-channel or 2-channel SACD audio. Further details like the
SACD title and Artist could be shown by pressing the [DISP] key.
CD : Select to play back CD layer only.
NOTES
• This setting is only available when no disc is loaded in the disc tray.
• Selected mode becomes effective after you close the setup menu.

OSD LANGUAGE

Select a language for the SETUP menu. The following are the available
languages – English, German, French, Spanish, Italian, Russian and Swedish.

PARENTAL RATING (NORTH AMERICA VERSION ONLY)

Some movies contain scenes that may not be suitable for children to view.
Many of these discs contain parental control information that applies to
the complete disc or to certain scenes on the disc. Movies and scenes are
rated from Level 1 to 8, depending on the country. Some discs offer more
suitable scenes as an alternative.
The parental rating feature allows you to block access to scenes greater
than the rating you set up, thereby preventing your children from being
able to view material you believe is unsuitable. To activate [Parental Rating],
please be guided by the following:
1. Scroll to "Parental Rating" and press . [- - - -] will appear indicating
that a password is needed to change the ratings level.
2. Input the password you have setup at the [Parental Password] as
discussed below.
3. Upon entering the password, you can now set the parental rating level
you prefer.
4. Press
keys to save the settings and at the same time move to the
next option.
LEVEL 1-8
Level one (1) has the most restrictions and Level 8 is the least restrictive.
NOTES
If you set a rating level for the player, all disc scenes with the same rating
level or lower are played. Higher rated scenes are not played unless
an alternate scene is available on the disc. The alternative must have
a lower rating. If no suitable alternative is found, playback stops. You
must enter the 4-digit password in order to play the disc. Should you
forget your password, restore the T 535 to its factory default settings (See
"Factory Default" under the heading "General Setup Menu").

PARENTAL PASSWORD

You can change the password for parental control. Enter your four-digit
password when prompted on the screen. The default password is [1234].
1. Scroll to [Parental Password]. Enter your old four-digit password using
the numeric buttons (0-9).
2. When doing this for the first time, enter [1234]. If the password is
correct, the submenu appears.
3. Enter the new four-digit password using the numeric buttons (0-9).
[Confirm Password] is consequently highlighted.
4. Enter the new four-digit password again. The previous menu screen
appears and the new four-digit password is now valid.