Connecting To A Pc; Installing The Software - Sharkoon FireGlider Manual

5. Connecting to a PC

1. Plug the mouse's USB connector to an available USB
connector of your PC.
2. The operating system will automatically recognize the mouse
and install all needed drivers.
3. If your mouse is not recognized, disconnect it and try
another of your PC's USB connectors.

6. Installing the software

1. Before installing the included software, remove all other
installed mouse software from your system.
2. Put the includedTools CD into your CD/DVD drive.
3. Open the CD/DVD drive's folder (e.g. D:).
4. Choose the
"setup.exe" (fig. 1).
5. The InstallShield Wizard will be launched (fig. 1).
Continue by clicking "Next" or press "Cancel" to abort the
installation.
RUSH FIREGLIDER/FIREGLIDER BLACK
directory "MouseGeneral..." and start
fig. 1