Charging The Battery - Canon EOS 1200D Instruction Manual

Charging the Battery

LC-E10
Full-charge lamp
LC-E10E
It takes approx. 2 hours to fully recharge a completely
exhausted battery at room temperature (23°C / 73°F). The time
required to recharge the battery will vary greatly depending on
the ambient temperature and the battery's remaining capacity.
For safety reasons, recharging in low temperatures (6°C - 10°C /
43°F - 50°F) will take longer (up to approx. 4 hours).
30
Remove the protective cover.
1
Attach the battery.
2
Recharge the battery.
3
For LC-E10
For LC-E10E
Charge lamp
Detach the protective cover provided
with the battery.
As shown in the illustration, attach the
battery securely to the charger.
To detach the battery, follow the
above procedure in reverse.
As shown by the arrow, flip out the
battery charger's prongs and insert
the prongs into a power outlet.
Connect the power cord to the
charger and insert the plug into a
power outlet.
Recharging starts automatically and
the charge lamp lights up in orange.
When the battery is fully recharged,
the full-charge lamp will light up in
green.