5.
Disconnect the coin-cell battery cable from the system board. Unroute the cables from the slot and remove the
coin-cell battery from the computer.
Installing the Coin-Cell Battery
1.
Place the coin-cell battery in its slot.
2.
Route the cables and connect the coin-cell battery cable to the system board.
3.
Connect the I/O cable to the system board.
4.
Tighten the screw that secures the coin-cell battery to the system board.
5.
Install:
a. palmrest
b. keyboard
c. keyboard trim
d. base cover
e. battery
f.
SD card
6.
Follow the procedures in
Removing the Speakers
1.
Follow the procedures in
2.
Remove:
a. SD card
b. battery
c. base cover
d. keyboard trim
e. keyboard
f.
palmrest
After Working Inside Your Computer .
Before Working Inside Your Computer .
25