TVLogic LVM-172W Operation Manual
  1. Manuals
  2. Brands
  3. TVLogic Manuals
  4. Monitor
  5. LVM-172W
  6. Operation manual

TVLogic LVM-172W Operation Manual

Multi format lcd monitor
Hide thumbs

Advertisement

Table of Contents

Multi Format

LCD MONITOR

Operation Manual
LVM-172W
LVM-242W
MULTI

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LVM-172W and is the answer not in the manual?

Questions and answers

Related Manuals for TVLogic LVM-172W

Summary of Contents for TVLogic LVM-172W

  • Page 1: Lcd Monitor

    Multi Format LCD MONITOR Operation Manual LVM-172W LVM-242W MULTI...

  • Page 3: Table Of Contents

    Contents CAUTION FEATURES NAME & FUNCTION OF EACH PART MENU ORGANIZATION & ADJUSTMENT MENU CONTENTS OTHER FUNCTIONS DVI DIGITAL/ANALOG INPUT SIGNAL FORMAT PRODUCT SPECIFICATION PRODUCT LINEUP OPTIONAL ACCESSORIES FCC (Federal Communications Commission) This equipment has been tested and found to comply with the limits for class A digital device, pursuant to part 15 of the FCC Rules.

  • Page 4: Caution

    Caution ALWAYS USE SET VOLTAGE. AC 100 ~ 240V (1.2A/50~60HZ), DC 12/24V (MAX 6A) All operating instructions must be read and understood before the product is operated. These safety and operating instructions must be kept in safe place for future reference. All warnings on the product and in the instructions must be observed closely.
  • Page 5 Caution In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.

  • Page 6: Features

    - This product supports protocols provided by TVLogic or a TSL protocol. Additional Features - Wide Viewing Angle, Loop Through (SDI/Analog), VESA Mounting , 1000:1 Contrast ratio (LVM-242W), 900:1 Contrast ratio (LVM-172W), 350 cd/m2 brightness (LVM-172W), 400 cd/m2 brightness (LVM-242W), Easy to operate OSD user interface, Rack Mountable design.

  • Page 7: Name & Function Of Each Part

    Name & Function of Each Part LVM-172W FRONT TALLY L L APERTURE BRIGHT CHROMA CONTRAST VOLUME POWER ENTER ANALOG UP/DOWN SDI-A MENU SDI-B TC(TIME CODE) PHASE SCAN BLUE ONLY/MONO ASPECT H/V DELAY MARKER [ANALOG] Button/Lamp - Used to select desired Analog input. (CVB1/2/3, S-Video, Component, RGB) - Press the button to activate the analog input menu-selection, then use UP and DOWN button to select desired input.
  • Page 8 - Used to move within the menus during OSD menu activation and is also used to increase the value of selected feature. - In Pixel to Pixel mode, press the button to rotate the display clockwise. (LVM-172W) [DOWN] Button - Used to move within the menus during OSD menu activation and is also used to decrease the value of the selected feature.
  • Page 9 Name & Function of Each Part [BRIGHT] Knob - Used to adjust the degree of brightness. - The value is selectable between -128 ~ 127. [CHROMA] Knob - Used to adjust the saturation of the image. - The value is selectable between -128 ~ 127. # This feature is not available in DVI Graphic mode and DVI Analog.
  • Page 10 Name & Function of Each Part [ASPECT] Button/Lamp - Used to change the display ratio between 4:3 and 16:9. * Display ratio locks to 16:9 if the display ratio of input signal is 16:9. [MARKER] Button/Lamp - Used to activate/deactivate the Marker. The type of marker at work may be selected on the main menu. [H/V DELAY] button/lamp - Used to check horizontal sync and vertical sync simultaneously.
  • Page 11 Name & Function of Each Part LVM-172W REAR FACTORY PGM CVBS1/G/Y/S-Y CVBS2/B/Pb/ CVBS3/R/Pr/S-C DVI-I SDI IN-A SDI IN-B SDI OUT AUDIO OUT AUDIO IN REMOTE POWER S/W RS422 OUT AC IN RS422 IN DC IN LVM-242W REAR FACTORY PGM CVBS1/G/Y/S-Y...
  • Page 12 FACTORY PGM (D-SUB 15 pins) - Input connector for FACTORY PGM allowing for firmware update and auto calibration. DC IN (XLR, 4 pins) - DC Power : LVM-172W : 12V or 24V, LVM-242W : 24V DC IN socket 1,2: GND...

  • Page 13: Menu Organization & Adjustment

    Menu Organization & Adjustment The product may be controlled and set system-wise through OSD displayed on the screen. [1] Menu Organization Below is the organization of the product’s menu. [2] Menu Control You may control various functions using MENU, UP/DOWN and ENTER buttons on the bottom front of the monitor.

  • Page 14: Menu Contents

    Below are descriptions for each function of the menu. Brightness - This item controls the degree of brightness between -128 ~ 127. #Brightness can be adjusted by using the [BRIGHT] control knob(LVM-172W) or [DOWN/BRIGHT] button (LVM-242W) on the front of the monitor. Contrast - This item controls the contrast ration between -128 ~ 127.
  • Page 15 [2] PICTURE (DVI Analog) Brightness - This item controls the degree of brightness between -128 ~ 127. # Brightness can be adjusted by using the [BRIGHT] control knob(LVM-172W) or [DOWN/BRIGHT] button (LVM-242W) on the front of the monitor. Contrast - This item controls the contrast ratio between -128 ~ 127.
  • Page 16 Menu Contents [3] COLOR Color Temp - This item controls color temperature and allows instant access to preset color temperature settings of 3200K, 5600K, 6500K, 9300K and USER 1/2/3. - In USER1/2/3 mode, user can define custom RGB GAIN and BIAS values. Gain Red - This item controls red gain value between -192 ~ 63.
  • Page 17 Menu Contents [4] MARKER MARKER - This item selects the marker type when the MARKER is displayed on the screen. - Marker may only be activated by pressing the MARKER button on the front of the monitor. - Available marker types are OFF, 16:9, 4:3, 4:3 ON AIR, 15:9, 14:9, 13:9, 1.85:1, 2.35:1, 1.85:1 & 4:3. Center Marker - This item displays the CENTER MARKER on the screen.
  • Page 18 Menu Contents MARKER MAT - This item darkens the area of the outside of MARKER. - The degrees of darkness are between Off ~ 7. - Larger value means darker the marker mat is. MARKER COLOR - This item controls the color of the MARKER lines. - Available colors are white, gray, black, red, green and blue.
  • Page 19 Menu Contents [5] REMOTE REMOTE (RJ-45) 1: Pin1 2: Pin2 3: Pin3 4: Pin4 5: Pin5 6: Pin6 7: Pin7 8: GND - This product provides a REMOTE CONTROL mode. - The user may connect an RJ-45 jack to the REMOTE terminal on the rear of the unit and designate a function for each pin.
  • Page 20 Menu Contents [6] WAVE/FOCUS PART WAVEFORM/VECTOR - This function sets the Waveform and Vectorscope. This feature is available in SDI mode. - Selectable features: OFF, WAVEFORM, VECTOR * WAVEFORM : Displays the shape and form of luminance level of a signal. * VECTOR : Displays color components of the input signals .
  • Page 21 Menu Contents [7] AUDIO PART AUDIO VOLUME - This item controls the embedded audio output volume for the internal speakers and [AUDIO OUT] on the back of the monitor - Available values are between 0 ~ 20. EM. AUDIO LEFT - This item controls embedded audio channel for left audio out of internal speaker and [AUDIO OUT] in the back of the monitor.
  • Page 22 - Effective items are MARKER, CENTER MARKER, SAFETY AREA, MARKER MAT, MARKER COLOR, BRIGHT, CONTRAST CHROMA, PHASE and APERTURE. MONITOR ID - This item sets the ID of each monitor for the TVLogic control protocol or DYNAMIC UMD using RS-422/485 communication. - Available values are between 0 ~ 99.
  • Page 23 - Available values are CENTER, R-T, R-B, L-B and L-T. - If WAVEFORM/VECTOR is activated, R-B and L-B will be unavailable. LOCK ENABLE - Only applicable to LVM-172WS model. - Enable code input item to convert LVM-172WS(SD) to LVM-172W(HD) model.

  • Page 24: Other Functions

    Other Functions – Input select(LVM-172W) ANALOG INPUT MENU LVM-172W is capable of processing all input signals usable in ANALOG mode. 1. Press [ANALOG] button on the front of the monitor and activate the OSD menu as shown on the left.
  • Page 25 Other Functions – Input select(LVM-242W) ANALOG INPUT MENU LVM-242W is capable of processing all input signals usable in ANALOG mode.. 1. Press [ANALOG] button on the front of the monitor and activate the OSD menu as shown on the left. Seledt the desired input by using the [UP]/[DOWN] button and press the [ENTER] button to confirm.
  • Page 26 Other Functions WAVEFORM FEATURE (Only available in SDI mode) WAVEFORM : Displays the shape and form of luminance level of a signal. VectorScope: Displays color components of the input signals on the XY axis HD and SD inputs are classified into two kinds, depending on the input. 100% and 75% scales indicated on a display. 100%...
  • Page 27 Adjusted image always displays in the center of the screen. Example) If user wishes to change 16:9 aspect ratio image to 2.35:1 aspect ratio, change 1920x1080 resolution to 1920 x 817 (LVM-242W) or 1366x581(LVM-172W) by adjusting width and height of the image in USER ASPECT mode.

  • Page 28: Dvi Digital/Analog Input Signal Format

    DVI Analog Input Signal Format DVI ANALOG Sync (H/V) Resolution (Source) DotClock [MHz] f H (kHz) f V (Hz) 640 x 350 70Hz (IBM) 25.175 31.469 70.086 640 x 480 60Hz (IBM) 25.175 31.469 59.940 720 x 400 70Hz (IBM) 28.322 31.469 70.087...

  • Page 29: Dvi Digital Input Signal Format

    DVI Digital Input Signal Format DVI DIGITAL Resolution (Source) DotClock [MHz] f H (kHz) f V (Hz) Sync (H/V) 640 x 350 70Hz (IBM) 25.175 31.469 70.086 640 x 480 60Hz (IBM) 25.175 31.469 59.940 720 x 400 70Hz (IBM) 28.322 31.469 70.087...

  • Page 30: Product Specification

    Product Specification LVM-172W 1 x DVI-I DVI IN / VGA IN 1 x HDMI 3 x BNC Analog Input Input 2 x BNC SDI A/B Channel Input 1 x BNC 3 x BNC Analog Loop Through Output Output 2 x BNC...
  • Page 31 Product Specification LVM-242W 1 x DVI-I DVI IN / VGA IN 1 x HDMI Input 3 x BNC Analog Input 2 x BNC SDI A/B Channel Input 1 x BNC 3 x BNC Analog Loop Through Output Output 2 x BNC 1 x BNC SDI A/B Selected Channel Output (Active Through-Out) Analog...

  • Page 32: Product Lineup

    2. Color : 16.7M(true), 24bit 3. Contrast - 350 :1 4. Viewing Angle : 170 5. Weight : 2.8Kg (6.17 lb) LVM-171WP / LVM-172W / LVM-173W 1. LCD Resolution : 1366 x 768 (16:9) 2. Color : 16.7M(true), 24bit 3. Contrast - 900 :1 4.
  • Page 33 Product Lineup LVM-321W 1. LCD Resolution : 1920 x 1080 (16:9) 2. Color : 10 bit(D), 1.068 colors 3. Contrast - 1300 :1 4. Viewing Angle : 178 5. Weight : 21.45Kg (47.3 lb) LVM-401W / LVM-403W 1. LCD Resolution : 1920 x 1080 (16:9) 2.

  • Page 34: Optional Accessories

    Optional Accessories 7” 9” 17” 24” 40” 7” 9” 17” 24” External Filter Rack-Mountable Kit 46” 57” 7” 9” 17” 17” 7” 9” Tripod Ball Head Hood-&-Handle 17” 24” 32” 40” 46” 57” RACK MOUNT ANY DISPLAY UP TO 24” 7 inch 17 inch 24 inch...
  • Page 35 FOR MORE INFORMATION PLEASE VISIT : http://www.tvlogic.co.kr Developed by #914 Namsung Plaza(Ace Techno Tower 9), 345-30 Gasan-dong, Geumcheon-gu, Seoul, 153-782, KOREA Tel : +82-2-2026-1333, Fax : +82-2-2026-1339, Email: support@tvlogic.co.kr...

This manual is also suitable for:

Lvm-242w

Table of Contents