Mounting To A Vertical Pole Mast; Mounting With A Mounting Kit (Optional) - Vaisala WXT510 User Manual

Weather transmitter

Hide thumbs Also See for WXT510:

Table of Contents

User's Guide _______________________________________________________________________

NOTE

18 ___________________________________________________________________ M210470EN-B

Each of the mounting options is further described in the following

sections.

Weather Transmitter WXT510 must be installed to an upright,

vertical position.

Mounting to a vertical pole mast

1. Remove the screw cover and insert the WXT510 to the pole mast.

2. Align the transmitter in such a way that the arrow points to north,

see page 20.

3. Tighten the fixing screw and replace the screw cover.

Fixing

screw

(provided)

1. Insert the mounting kit adapter to the transmitter bottom in the

position shown in the picture.

2. Turn the kit inside the bottom firmly until you feel that the adapter

snaps into the locked position (see picture in the next page).

3. Mount the adapter to the pole mast (do not tighten the fixing

screw).

4. Align the transmitter in such a way that the arrow points to north,

see page 20.

5. Tighten the fixing screw to fix the adapter firmly to the pole mast.

When removing the WXT510 from the pole just turn the transmitter

so that it snaps out from the mounting kit. When replacing the device

the alignment is not needed.

Table of Contents