Pro-Form Le Tour De France PFEX01312.0 User Manual page 8

5. Slide the Seat (5) onto the post on the Seat
Carriage (4). Make sure that the Seat is level
and that it is pointing straight forward. Then,
tighten the two nuts (not shown) beneath the
Seat.
6. Orient the Handlebar Post (6) as shown.
Have a second person hold the Handlebar Post
(6) near the Frame (2). Locate the wire tie in the
Handlebar Post, and tie the lower end of the wire
tie to the Lower Wire (69). Then, pull the upper
end of the wire tie until the Lower Wire is routed
through the Handlebar Post.
Tip: Avoid pinching the Lower Wire (69).
Loosen the indicated Post Knob (47) and pull it
outward. Then, insert the Handlebar Post (6) into
the Frame (2).
Move the Handlebar Post (6) upward or down-
ward to the desired position, release the Post
Knob (47) into an adjustment hole in the
Handlebar Post, and then tighten the Post
Knob. Make sure that the Post Knob is firmly
engaged in an adjustment hole.
7. Orient the Handlebar (7) as shown.
While a second person holds the Handlebar (7)
near the Handlebar Post (6), connect the Upper
Wire (68) to the Lower Wire (69). Then, insert
the wires into the Handlebar Post.
Tip: Avoid pinching the wires. Attach the
Handlebar (7) to the Handlebar Post (6) with a
5/16" x 3/4" Screw (106) and a 5/16" x 2 1/4"
Screw (105).
5
5
Nut
4
6
Avoid pinching the
Lower Wire (69)
Holes
6
Wire Tie
2
69
7
105
7
Avoid pinching
the wires
6
8
Nut
47
106
68
69