VIDEO PRESENTER SVP-5000N/SVP-5100N/SVP-5200N SVP-5000P/SVP-5100P/SVP-5200P Operation Manual WHERE THE VIDEO PRESENTER IS NEEDED CHECKING PARTS Accessories Supplied Options CONTROL LOCATIONS AND FUNCTIONS Front View Control Panel Input and Output Connectors Remote Control CONNECTION To TV or Monitor To TV or Monitor and External AV Device...
Page 2
This manual covers six models. The main differences among them are as follows: SVP-5000N, SVP-5000P: Standard SVP-5100N, SVP-5100P: Free-angle camera head Standard + PC interface board equipped...
Page 3
Menu display on the Head Lamp screen This is used when you project an object in a dark place. When you control functions, the setup status will be displayed on the screen. Remote control All the functions are controlled with it. LCD monitor This monitor eliminates the need to provide a separate TV monitor or to position the image while...
WHERE THE VIDEO PRESENTER IS NEEDED Video conference Medical or scientific research Your Video Presenter allows you to use X-rays, Your Video Presenter may be effectively used to transparencies, slides and negatives for present data in a video conference. Data, a photo study/research purposes.
CHECKING PARTS Accessories Supplied Remote Control RS-232C Jack Adapter lens and lens cap Power cable Used to control your unit They are pre-attached in the through serial port of PC. main body at factory. Audio/Video cables S-video cable Carring bag Operation manual Yellow plug: Video cable Required to connect with a TV...
CONTROL LOCATIONS AND FUNCTIONS Front View Head lamp connector Used to connect the head lamp. LCD monitor connetor Camera head Used to connect the optional LCD monitor. Rotatable 120 to top or bottom and 270 to right or left. Connectors Refer to the opposite page.
Control Panel You can find the same function buttons on the remote control supplied. The buttons perform the same function as buttons on this control panel. POWER button Used to turn power on and off. AWC button IRIS button Used to adjust white balance Used to adjust the brighteness POWER automatically.
CONTROL LOCATIONS AND FUNCTIONS SHARP+ button (continued) For making the image sharper. SHARP- button For making the image duller. Remote Control AF button Used to focus automatically. All function buttons are on this remote control. You can find several main function buttons on the COLOR/BW button control panel of the main body.
Page 9
POWER button Used to turn power on and off. INT/EXT button Used to choose the signal input to be displayed. INT: Internal signal out from this unit. EXT: External signal out from external AV device (if connected to this unit). NEGA/POSI button Used to project a negative film as a positive one.
CONNECTION Use yellow (or red) plug to connect video terminal and white plug to connect audio terminal. To TV or Monitor Yellow TV, Monitor, To Video Input terminal LCD Projector PC interface POWER IN RS232C OUT 1 OUT 2 VIDEO AUDIO S-Video out OUT 1...
To Personal Computer Parallel communication (available for SVP-5100N, SVP-5200N, SVP-5100P, SVP-5200P) To parallel port PC interface POWER IN Serial communication RS232C OUT 1 OUT 2 VIDEO AUDIO To serial port (9 pin or 25 pin) S-Video out OUT 1 OUT 2 Personal Computer Video Presenter You can also connect a PC to this unit which is connected to TV or monitor, or external AV device.
CONNECTION (continued) To Microphone Yellow To Video Input terminal TV, Monitor, LCD Projector PC interface POWER IN RS232C OUT 1 OUT 2 VIDEO AUDIO S-Video out OUT 1 OUT 2 Microphone Video Presenter To Audio Input terminal White Microphone is not supplied with this unit.
Before operating unit; OPERATION Make sure you connect AC power outlet properly. Make sure you connect the output device properly. 1. Stretch the camera head as shown and 3. Press the POWER button. remove the lens cap. Adapter lens Lens cap You can use the POWER button on the control panel of the main body.
OPERATION (continued) Using Control Buttons Choosing Input Signal Positive and Negative Switching Your Video Presenter includes two input sources; This feature allows you to display negative film as one is internal source for the signal projected positive image on the screen. through your Video Presenter, another is external AV source such as VCR.
White Balance Zooming For automatic adjustment, press AWC button. To When you project small objects or large object, obtain best result, put the camera lens facing the you can maginify or reduce the image on the white paper and press AWC button. screen.
OPERATION (continued) Flickerless Mode Volume button Use this button to adjust the volume of an If your monitor screen flickers, press optional microphone if connected with this unit. FLICKERLESS button. It will reduce the flicker on the screen. Adjusting Sharpness Focusing on Object This fuction is to adjust the image sharpness.
Digital Features (available for SVP-5200N/SVP-5200P) Image Reverse Freezing Image Press FREEZE button to hold the image on the Press REVERSE button to rotate the image by 180 screen for a moment. Use this feature when you replace the objects with the next one. Your Video Presenter does not project the operator replacing the objects, hence preventing the audience from being distracted during your presentations.
Page 18
OPERATION (continued) Screen Divide and Image Shift If a portion of the recalled image is hidden (because you see a full screen image on half screen), press SHIFT button to shift the recalled image shown in the divided screen from the left to right.
OPTIONAL ACCESSORIES Lightbox LCD Monitor This lightbox is convenient when you project a slide This option allows you to monitor the image projected film or negative film. Avoid accidental scratch on through your Video Presenter. The same image is the surface, or you can not obtain clear image. displayed on the TV or projector connected to this unit.
OPTIONAL ACCESSORIES (continued) Microscope Eyepiece and Lamp You can use only the microscope equipped with 23.2 object lens. 3. Connect the power plug from the lamp to 1. Put some object you want to examine under your Video Presenter as shown. The lamp the microscope you are using, and choose a will be lit up.
Page 21
. Remove the microscope lens and connect 7. Examine the object displayed on the TV or the microscope to your Video Presenter. projector, and focus on the object properly using the adjustment lever on the Adjust the angle of the camera head of the microscope.
RS-232C COMMUNICATION Setup RS-232C Command Code 1. Press POWER button, and wait until COLOR ADJUSTING disappears on the screen. 2. Press EXIT button, then FLICKERLESS button within 10 seconds. 3. Select the desired menu with IRIS+ or IRIS- button. The selected item is blinking. 4.
Data Format of State Request Code 1. The return value of H'81 3. The return value of H'83 3 bit : Reverse off "0" 0 bit : Lamp off "0" in recall mode "1" "1" 4 bit : Recall off "0"...
CARE AND STORAGE Storage Safety Precautions When you do not use your Video Presenter for a long time, store your Video Presenter in its It is illegal to make a copy of a film, protective bag. photograph, or book which are copyrighted. 1.
Page 25
Keep your unit safe from sudden shocks Avoid using alcohol or other chemical or vibration. Be careful not to drop it. solvents. When you do not use it for a long time, unplug the Do not place or drop a heavy power cord and store the unit in its carring bag material on it.
TROUBLESHOOTING Picture is not displayed. Sometimes problems can be easily solved by checking a few basic things. Check below before you call for help or take your Video Presenter to an authorized service center. Check if the brightness is proper. Press button to adjust the IRIS brightness.
Replacing Fuse Installing or Replacing Battery on Remote Control Before using the remote control at first time, install batteries. Replace the batteries when your Video Presenter fails to respond to the remote control. 1 . Remove the cover of the battery compartment 1 .
EN 50081-1 : 1992 (55 022 : 1987 Class B) EN 50082-1 (IEC 801-2,-3,-4) We, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s). Manufacturer SAMSUNG TECHWIN CO., LTD Legal Representative in Europe Signature Signature...
Page 31
SALES NETWORK HEAD OFFICE : SAMSUNG TECHWIN CO., LTD 145-3 Sangdaewon 1-Dong, jungwon-Gu, Sungnam, Kyungki-Do, Korea 462-121 TEL : 82-31-740-8137~8141 FAX : 82-31-740-8145 U.S.A OFFICE : SAMSUNG OPTO-ELECTRONICS AMERICA, INC. 40 Seaview Drive, Secaucus N.J.07094-1807, U.S.A TEL : 201-902-0347 FAX : 201-902-9342 http://www.samsungtechwin.com...