Page 2
Dogtra Portable Remote Controlled Dog Training Collars Owner’s Manual Please read this manual before operating your system, and keep it for future reference.
Product Safety and Health Statements Proper e-collar use iQ Pet e-collars are intended for the sole purpose of behavior on other animals. iQ Pet and Dogtra Company does not assume any liability for the improper use of an iQ Pet e-collar. Aggressive dogs...
Page 4
Duration your dog can wear the unit Leaving the receiver/collar in the same location on the dog’s neck for an extended period of time can cause skin irritation. If the dog is to wear the e-collar for long periods, occasionally reposition the receiver/collar so that the contact points are moved to a different location on the dog’s neck.
6. Checking the Status Using the LED Indicator ....7. Battery Replacement ............8. Attaching the Collar Strap ........... 9. Expanding the iQ CLiQ into a 2-Dog System....General Training Tips ..............Troubleshooting Guide ..............Warranty and Repair Information ..........
At a Glance Included in Package Handheld Transmitter Receiver/Collar Detachable Strap Owner's Manual 3V Coin Batteries (4) (CR 2032) Optional Accessories To purchase optional accessories, please visit www.iqpetcollar.com or call our customer service at 1-888-811-9111.
Understanding your Training System 1. How to Turn the Unit On and Off To activate the receiver/collar, place the red dot on the back of the handheld transmitter to the red dot on the receiver/collar. Hold the two red dots together for a moment until the LED light on the receiver/collar comes on.
5 seconds. When the iQ CLiQ has been expanded to a 2-dog system, the Dog 2 Stimulation Button will send a momentary burst of stimulation to the corresponding receiver/collar. Holding down the stimulation button will send a pulsating stimulation for up to 5 seconds.
3. How to Fit the Collar on the Dog the dog. The best location for the receiver/collar box is off to either side of the dog’s windpipe. A loose fit can allow the receiver/collar to move around on the dog’s neck.
5. Maximizing the Distance The iQ CLiQ has a 100 Yard range. Depending on the way you hold your transmitter, the range may vary. Hold the transmitter away from your body to get the greatest range. Avoid touching the antenna as the range may substantially decrease.
6. Checking the Status Using the LED Indicator When the receiver/collar is on and ready to operate, the LED flashes every 4 seconds. The LED will glow steadily on both the handheld transmitter and the receiver/collar while any buttons are pressed. The LED color indicates the battery life level.
7. Battery Replacement - Using a coin, unscrew the battery cover counterclockwise. - Insert two batteries with both of the (+) plus sides facing upwards. - Check to make sure that the rubber battery cover clockwise. - Using a coin, unscrew the battery cover counterclockwise.
8. Attaching the Collar Strap 1. With the LED indicator and red dot facing up, insert the left portion of the iQ CLiQ receiver box into the collar strap. Pull the strap around the body the rest of the iQ CLiQ receiver box.
9. Expanding the iQ CLiQ into a 2-Dog System 1. To turn the iQ CLiQ into a 2-dog system, start with the handheld transmitter with the stimulation set to level 0. Hold down buttons 1 and 2 simultaneously for 5 seconds. You should now see that the LED indicator is blinking rapidly.
General Training Tips Your dog must know some very basic obedience commands before a command, followed by lots of repetition over an extended period. As distractions and different locations to strengthen them. Throw in the correct amount of positive and negative reinforcement and you should end up with a well-mannered dog.
Page 19
be challenging, especially when delivering a toy or treat from your pocket. The clicker, which makes a noise that is perfectly consistent and distinct, eliminates this problem by marking the exact moment your dog does something correctly. Clicking right as the behavior is occurring tells your dog that what he is doing in that moment has earned him a reward.
Page 20
When you feel your dog understands the obedience commands on the leash we can now start with the electric collar training. With the dog on the leash wearing the electric collar continue with your obedience as a command is given; the stimulation is removed as the dog complies. Through repetition, a dog learns to turn off the light stimulation by performing the command.
Troubleshooting Guide - If the iQ CLiQ does not turn on, the batteries may need to be replaced. - With an average usage of 10 hours a day, the batteries will need to be replaced every 2 weeks. is fully sealed, then rinse the receiver/collar with soap and water. Dry the unit with a towel thoroughly before using.
Page 22
shaking, looking over his shoulder, etc. The response may be very subtle. - Your tolerance may be higher than your dog’s. You may need to try the unit on your wrist where sensitivity is higher and/or increase the stimulation level. Be sure both contact points are touching your skin. - The battery may be low, check the LED light for battery life.
Warranty and Repair Information is for Parts, Labor, and Accessories. After the first year, the cost of Parts, Accessories, Labor fees, and Shipping fees incurred are the customer’s responsibility. Labor fees will be variable depending on the extent of the work required. All products must be registered and/or a proof of purchase is required to initiate repair work under warranty.
Page 24
or receiver will be the owner’s responsibility. The warranty is void if the unit has been altered or an unauthorized person has damaged the unit while attempting repair work. The removal of serial numbers from any iQ Pet products will void the warranty. iQ Pet reserves the right to retain and discard any parts or accessories that have been found damaged upon replacement and repair.
Page 25
22912 Lockness Avenue, Torrance, CA 90501 U.S.A. Tel: 310-534-0101 Fax: 310-534-9111 Toll free: 1-888-811-9111 Email: info@iqpetcollar.com Website: www.iqpetcollar.com FCC ID : SWN-CLIQ This device complies with Part 15 of the FCC Rules. (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the iQ cliq and is the answer not in the manual?
Questions and answers