Using The Scanner Buttons; Using The Power Button - Fujitsu ScanSnap N1800 Operator's Manual

2.2

Using the Scanner Buttons

■ Using the Power Button

When the scanner is off or in standby mode, pressing the power button will start the
scanner up and display the login window.
When the scanner is on, pressing the power button will show a message.
(*1) Other than pressing the power button, any of the following operations will startup
the scanner from standby mode.
Loading the documents into the ADF paper chute.
Closing the top cover.
Pressing the power button.
Pressing the Scan button.
Touching the LCD touch panel.
The window displayed after restarting varies according to the automatic login
settings in the following way:
If automatic login is enabled, the operation window is displayed.
If automatic login is disabled, the [Login] window in displayed.
Shutdown
Press Button
Operating
Login Window
Login
Operation Windows
No operation
for set period
Press
Standby
Button (*1)
No operation
for set period

2.2 Using the Scanner Buttons

LED Dark
LED Lit
Press Button (*2)
LED Lit
56
Message