Figure 1.23 Lvd Dt Data Transfer Measurement Point - Fujitsu MBA3073 SERIES Technical Manual

(4) LVD DT Data Transfer
Figure 1.23 is the LVD DT Data Transfer measurement point.

Figure 1.23 LVD DT Data Transfer measurement point

Notes:
1. V - negated signal
N
2. V - asserted signal
A
3. t = 1.25ns minimum
m
4. V or V are required to drive the 100 mV at the leading edge of the transition. Those signals shall be at
A N
least |100 mV| for at least t
5. Differential voltage signals in all cases.
6. t and t shall be less than 3 ns.
af ar
7. Any signal structure may occur at the receiver while in the t
C141-C015
*
*
before and after the transition.
m
*
*
or t region including slope reversal.
af ar
57