KitchenAid ELECTRIC RANGE User Instructions page 5

KEYPAD FEATURE
BAKE Baking and
roasting
BROIL Broiling
CONVECT BAKE Convection
cooking
CONVECT ROAST Convection
cooking
CONVECT BROIL Convection
cooking
EASYCONVECT Recipe
CONVERSION conversion for
convection
cooking
BREAD PROOF Proofing bread
KEEP WARM Hold warm
DELAY START Delayed start
INSTRUCTIONS
1. Press BAKE.
2. Press the number keypads to set a temperature other than 350°F (177°C) in 5° increments
between 170°F and 500°F (77°C and 260°C).
3. Press START.
4. To change the temperature, repeat steps 1 and 2. Press START for the change to take effect.
5. Press OFF when finished.
1. Press BROIL.
2. Select the broiling temperature by pressing 1 - high (500°F [261°C]), 2 - medium (450°F
[234°C]) or 3 - low (400°F [204°C]).
3. Press START and allow the oven to preheat for 5 minutes.
4. Position the cookware in the oven and close the door.
5. Press OFF when finished.
1. Press CONVECT BAKE.
2. Press the number keypads to set a temperature other than 325°F (162°C) in 5° increments
between 170°F and 500°F (77°C and 260°C).
3. Press START.
4. To change the temperature, repeat steps 1 and 2. Press START for the change to take effect.
5. Press OFF when finished.
1. Press CONVECT ROAST.
2. Press the number keypads to set a temperature other than 325°F (162°C) in 5° increments
between 170°F and 500°F (77°C and 260°C).
3. Press START.
4. To change the temperature, repeat steps 1 and 2. Press START for the change to take effect.
5. Press OFF when finished.
1. Press CONVECT BROIL.
2. Press the number keypads to set a temperature other than 450°F (234°C) in 5° increments
between 170°F and 500°F (77°C and 260°C).
3. Press START.
4. To change the temperature, repeat steps 1 and 2. Press START for the change to take effect.
5. Press OFF when finished.
NOTE: For best results, preheat your oven to the required temperature prior to using
EasyConvect™ Conversion. After preheating is complete, press the OFF key before using
EasyConvect™ Conversion.
1. Press the appropriate EasyConvect™ key (MEATS, PIZZA, BAKED GOODS or OTHER).
2. Press the number keypads to enter the standard cooking temperature, then press START.
3. Press the number keypads to enter the standard cook time, then press START.
4. Place food in the oven at the appropriate time.
Check food for doneness before the stop time is reached. If food will not be done when stop
time is reached, add more cooking time before time elapses. See "Cook Time" section. At
the end of the stop time, the oven will automatically turn off.
5. Press OFF when finished.
Refer to the "EasyConvect™ Conversion" section for more information.
1. Press BREAD PROOF until the desired proof is displayed ("Standard Proof" or "Rapid
Proof").
NOTE: "Rapid" operates at a slightly higher temperature.
2. Press START.
Let the dough rise until nearly doubled in size. Proofing time may vary depending on dough
type and quantity.
3. Press OFF when finished proofing.
Refer to the "Proofing Bread" section for more information.
Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM.
2. Set temperature between 145°F (63°C) and 190°F (88°C) using the number keypads. The
default temperature is 170°F (78°C).
3. Press START.
4. Press OFF when finished.
The DELAY START keypad is used to enter the starting time for an oven function with a delayed
start.
5