Safety features
Thermo-electric ignition
Safety switch-off
System lock
Activating
Deactivating
30
This appliance is has a thermo-electric ignition safety device.
If the flame goes out, for example if food has boiled over or if
there is a sudden draught, and automatic re-ignition has
been unsuccessful, the supply of gas to the burner will be cut
off preventing any further escape of gas.
^ To use the burner again, turn the control clockwise to the
"ß" position, and then switch it back on as normal.
If a burner has been used for an unusually long period
(approx. 6 hours), it will switch off automatically.
^ To use the burner again, turn the control clockwise to the
"ß" position, and then switch it back on as normal.
The system lock is set with the hob switched off. When
activated, the hob cannot be switched on and the timer
cannot be used.
If the system lock is activated, the control lamps light up and
LC appears in the minute minder display when a sensor field
is touched or a control is turned.
The safety lock is deactivated if there is a power cut.
^ Simultaneously touch the - and + sensors, until LC appears
in the minute minder display and a signal tone sounds.
^ Touch the - and + sensors at the same time.
Need help?
Do you have a question about the KM 3034 and is the answer not in the manual?
Questions and answers