American Standard Plebe Round Front Complete Toilet 3500.000 Specification Sheet

PLEBE ROUND FRONT COMPLETE TOiLET
❑ 3500.000
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 305mm (12") rough-in
• Round front bowl
• Close-coupled tank
• Color matched trip lever
• 2 bolt caps
• Includes color-matched solid plastic seat
and cover
• Wax ring gasket with closet bolts
• 100% factory flush tested
Nominal Dimensions:
693 x 505 x 752mm
(27-5/16" x 19-7/8" x 29-5/8")
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
To Be Specified:
❏ Color: ❏ White ❏ Bone
❏ Supply with stop:
© 2008 AS America Inc.
PLEBE ROUND FRONT
FINISHED WALL
693mm
(27-5/16)
17mm ± 6mm
(11/16 ±1/4)
232mm
(9-1/8)
425mm
(16-3/4)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
16mm
(5/8)
308mm
159mm
(11-1/4)
(6-1/4)
305mm
C/L OF OUTLET
(12)
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
FOR ADDITIONAL INFORMATION REFER TO INSTALLATION INSTRUCTIONS
SUPPLIED.
iMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
K101
COMPLETE TOiLET
ViTREOUS CHiNA
505mm
(19-7/8)
C/L
SUPPLY
AS
REQ'D
383mm
(15-1/16)
*
375mm
203mm
(14-3/4)
(8)
152mm
(6)
FINISHED
232mm
FLOOR
(9-1/8)
Revised 2/08
752mm
(29-5/8)