Download Print this page

Krell Industries EVOLUTION 707 Owner's Reference Addendum

Automatic room equalization setup (ares)

Hide thumbs Also See for EVOLUTION 707:

Table of Contents

Download this manual See also: Owner's Manual & Reference

EVOLUTION 707 Owner's Reference Addendum

Automatic Room Equalization Setup (ARES)

Version 1.0

March 2010

Table of Contents

Need help?

Do you have a question about the EVOLUTION 707 and is the answer not in the manual?

Page 1 EVOLUTION 707 Owner’s Reference Addendum Automatic Room Equalization Setup (ARES) Version 1.0 March 2010...
Page 2 For older Evolution 707 units, new firmware must be loaded into the unit. Please contact Krell for help in performing this operation. Please read this document to learn how to take full advantage of them.
Page 3 EQ settings. The Automatic Setup requires the use of a video monitor to display the Evolution 707 menu. Set the video monitor to the input that the Evolution 707 video output is connected. Press the menu button to enter the MAIN MENU.
Page 4 Press ENTER to continue or wait 30 seconds for the test to resume. You can re-run the test after the speaker phase issue is addressed. Krell Industries, LLC ▪ 45 Connair Rd, Orange, CT 06477 ▪ 203-799-9954 ▪ sales@krellonline.com ▪ www.krellonline.com...
Page 5 Manual/View Setup requires the use of a video monitor to display the Evolution 707 menu. 1. Set the video monitor to the input that the Evolution 707 video output is connected. 2. Press the menu button to enter the MAIN MENU.
Page 6 DR indicates that the dynamic range is set to the Normal or Night mode, the dynamic range field is blank when the dynamic range is set to Max. See the main Owner’s Reference for further information on setting Dynamic Range. Krell Industries, LLC ▪ 45 Connair Rd, Orange, CT 06477 ▪ 203-799-9954 ▪ sales@krellonline.com ▪ www.krellonline.com...