Use Instruction; Login - ZMODO NVR User Manual

2 USE INSTRUCTION

2.1 Login

Starting Up
To turn on the device, plug power into the back of the unit and flip the switch on the back. The Power LED on
the front panel will light in red when the unit is receiving power. The preview screen will then display. The
login window will appear by either pressing [ESC] on the remote control, or by right clicking the mouse.
Select the appropriate user and the corresponding password to log in.
Note 1: Please allow the NVR up to two minutes to fully initialize
Note 2: Modify password by selecting <Tool Bar>→<System>→<System Setting>→<Password Setting>.Set
as indicated, new password will take effect instantly
Note 3: Default password for admin is 111111. Default password for User is admin. Admin password can
be restored to factory defaults by jumping the terminals on the motherboard l abeled JP1. Admin
user can modify the user's password after login. The system supports up to 8 users, admin is the
administrator user with all permissions. The admin user name cannot be deleted or changed. The
admin user can add and delete all other users and the corresponding permissions.
Note 4: "No Hard Drive" will prompt if you start up the device without hard drive, and you can choose whether
to enable a buzzer or not when no hard disk.
6