Control Panel - Jacuzzi Platinum Series Owner's Manual

Control Panel

The control panel is easy to use with fingertip control of all the spa's functions. Control of temperature, jets, blower,
filtration and spa light is readily accessible at your fingertips.
PROGRAM
MODE
Temperature Controls: When
either of these buttons is pressed
once, the display will show the
temperature that has been set, in
addition to the words SET HEAT. Each time either of
these buttons is pressed again, the set temperature will
increase or decrease in increments of 1 F depending on
which button is pressed. After 3 seconds, the display will
automatically show the current spa water temperature.
Jets Control: Press this button once to
activate a jet pump on one side of the spa;
press it twice for both pumps to operate
simultaneously for maximum effect. Press it
a third time to turn off the jet pumps. This button does not
affect the filter pump operation which is an independent
function.
When the jet action mode is started, it will automati-
cally stop after 30 minutes of operation.
Blower: Starts or stops the blower for
aeration in the spa. When both pumps
are operating, the blower is disabled.
The blower will also automatically stop after 30
minutes of operation.
6
OPERATION
LIQUID CRYSTAL
DISPLAY
FILTER 1
STANDARD HEAT
WARM TIME
•
••
OFF
COOL JETS
Light: Press the button once to activate the
highest setting, again for the medium setting
and again for the lowest setting. A fourth
press of the button will turn the light OFF.
The lights automatically turn OFF after 4 hours of
operation.
Time: Press to display time of day. Current
spa temperature display will automatically
resume after five seconds.
Program Function: Initiates time setting
and panel lock routines.
Mode Function: Switches spa operation to
either the economy or standard mode. In the
economy mode, the spa will heat but only
when the water temperature is 20 F below the setpoint.
In the standard mode, the spa will heat as needed to
maintain the set temperature.
Liquid Crystal Display
Continually shows operating
FILTER 1
status of the spa, as well as the
HEAT various monitoring functions
STANDARD
and programming information.
LIGHT
BLOWER