Transferring Calls With An Announcement; Using Call Forwarding - Panasonic DBS576 User Manual

more than one call. The Split key must be set up by the system administrator or
dealer.
To speak to the announcing party
1. While on a call, press the OHVA Split key.
2. Speak with the announcing party.
3. Press the OHVA Split key to return to the original call.

Transferring Calls with an Announcement

Note: This feature requires system programming or a specific DBS 576
configuration, and may not be available. For information, see your system
administrator or DBS 576 dealer.
To transfer a call while making an announcement
1. While remaining on the line with the original party, press the HOLD key.
2. Dial the extension number.
3. When you hear a busy tone, press 8.
4. Make your announcement.
5. When you are connected to the called party, replace the handset or press the ON/
OFF key.

USING CALL FORWARDING

You can send or forward your calls to another extension, an outside line, or to voice
mail from either your extension or from an alternate extension.
Notes:
• Any outside number used for Call Forwarding must already be programmed
into system speed dialing.
• Calls cannot be forwarded to an extension that already has Call Forwarding
set or Do-Not-Disturb (DND) turned on.
• The system allows you to cancel Call Forwarding and DND for your
extension in one step.
To set Call Forwarding
1. Pick up the handset or press the ON/OFF key.
576-20-750 DBS 576 (USA), issued January 1999
5. Communicating Within Your Office
55