TV operation
Turning off the built-in speakers
(26LV610C only)/ Checking the Digital-
signal strength
Use this feature to turn the TV speakers off when you connect an audio
system. (See "Connecting to an analog audio system"
This TV will allow you to view the digital signal meter for digital channels.
Turning off the built-in speakers
(26LV610C only)
1
Press MENU in the TV mode. Press ▲ or ▼ to
select "Audio" , then press ▶ or ENTER.
2
Press ▲ or ▼ to select "Speakers".
Then Press ◀ or ▶ to select "On" or "Off".
3
Press EXIT/CANCEL to return to the normal
screen.
Note:
•
If "Off" is selected, "Speaker Off" will be displayed on the
screen when the volume is changed.
To turn on the built-in speakers:
Select "On" in step 2 above.
40
52F0301A.indb 40
52F0301A.indb 40
Main Menu
Picture
Audio
Channel
Setup
: Select
ENTER:Set
Audio
HDMI
HDMI 1 Audio
Speakers
On
: Select
: Adjust
.)
20
Checking the Digital-signal
strength
1
Press MENU in the TV mode. The TV menu
screen will appear. Press ▲ or ▼ to select
"Channel" menu, then press ▶ or ENTER.
2
Press ▲ or ▼ to select "DTV Signal", then
press ▶ or ENTER.
The Digital-Signal strength screen will appear.
If necessary, adjust the direction of the antenna
to obtain the maximum signal strength.
3
Press EXIT/CANCEL to return to the normal
screen.
Note:
•
Signal meter feature is not available for analog channels.
After about 4 minutes, Signal Meter screen will return to
normal TV-operation automatically.
ENTER
/ / /
EXIT/CANCEL
MENU
Main Menu
Picture
Audio
Channel
Setup
: Select
ENTER:Set
DTV Signal
0
50
100
Signal Level
2/13/09 12:04:14 PM
2/13/09 12:04:14 PM