Engine - Husqvarna Rider 15V2 Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
The transmission's serial number is stated on the
barcode decal located on the front of the housing
on the left-hand drive axle:
• The type designation is stated above the
barcode and starts with the letter "K".
• The serial number is stated above the barcode
and has the prefix "s/n".
• The manufacturer's type number is stated under
the barcode and has the prefix "p/n".
State the type designation and serial number when
ordering spare parts.

Engine

New Husqvarna Rider professional machines have
two-cylinder, air-cooled engines from Kawasaki.
Major engine repairs are not described in this
workshop manual. This information can be read in
Kawasaki's own manuals, which contain detailed
information on the adjustment and repair of the
engines. The manuals can be ordered at an
authorised service workshop.
The table below shows the model number for
respective Rider models. These should be given
when ordering manuals:
Model
Rider 15V2
Rider Pro 15
Rider Pro 18
It is important to only use genuine spare parts when
repairing the engines. The warranty will no longer
be valid if other parts are used.
Kawasaki's engine type
FH430V-BS50
FH430V-BS50
FH531V-BS50
www.mymowerparts.com
Rider 15V2, Pro 15 and Pro 18 have two-cylinder,
overhead valve engines with pressure lubrication
and separate oil filters. Engines that are equipped
with catalytic converters reduce hydrocarbon and
nitrogen oxide emissions by up to 65% and carbon
monoxide emissions by up to 45%.
Design and function
17
English –