Congratulations on purchasing your new RCA product.
Please read these instructions for quick setup sheet on using the product.
Purple Speaker terminals
Blue Speaker terminals
C o n n e c t t h e p u r p l e a n d
Connect the blue and
black wires from Subwoofer
black wires from Rear Left
Speakers (surround sound)
Speaker to the terminals.
to the terminals.
Gray Speaker terminals
Connect the gray and black
w i r e s f r o m R e a r R i g h t
Speakers (surround sound)
to the terminals.
aC Power Cord
Connect the AC power
plug into the AC power
outlet. (See note 1)
HDMi out Jack
Lan (ethernet) Jack
Use to connect an Ethernet cable (CAT5
Use to connect
or better with RJ45 connector) to the
HDMI IN jack on the TV to the HDMI
ETHERNET jack on the back of your
OUT jack on this unit.
player and to an Ethernet jack on a
broadband hub or router.
Hub or network Router
aUDio oUt Jacks
Use to connect the AUDIO OUT jacks from the unit to the AUDIO
IN jacks on TV, VCR, Stereo system or other audio component.
ReaR View
FRont View
Green Speaker terminals
Connect the green and black
wires from Center Speaker
to the terminals.
an HDMI cable from
(See note 2)
VCR
Stereo System
tV
VoLUMe +/- Buttons
oPen/CLoSe Button
Opens and closes the disc tray.
Adjusts the volume.
StoP Button
PLaY/PaUSe Button
Stops playback.
Starts/pauses playback.
white Speaker terminals
Red Speaker terminals
Connect the red and black
C o n n e c t t h e w h i t e a n d
w i r e s f r o m F r o n t R i g h t
black wires from Front Left
Speaker to the terminals.
Speaker to the terminals.
Composite Video out Jack
Use to connect the VIDEO OUT jack on the
back of the unit to the Video IN jack on your
TV so that the video content goes from the
unit to the TV screen.
tV
SoURCe Button
S e l e c t s t h e i n p u t s o u r c e s . P r e s s
repeatedly to select between:
• BD/USB – to watch BD/DVD discs, or
photos and video files stored on to a
data disc or USB flash drive.
• AUX – to select the analog audio input.
on/StanDBY Button
Switches the unit on and off.
USB Port
For connection of USB flash drives.
Quick Setup Sheet
Composite Video out Jack
Use to connect
t h e C O M P O N E N T
VIDEO OUT jacks (Y, P
, P
) on the
B
R
back of the unit to the component video
IN jacks on your TV (shown at right) so
that the video content goes from the
unit to the TV screen.
aUDio in Jack
Use to connect the AUDIO IN jacks on
the back of the unit to the AUDIO OUT
jacks on TV, VCR, SAT/Cable Box or
others (TV example shown here).
VCR
Sat/Cable Box
notes:
1.
The AC power plug is
polarized (one blade
is wider than the other) and only
fits into AC power outlets one way.
If the plug won't go into the outlet
completely, turn the plug over and
try to insert it the other way.
2. The HDMI output will give you the
highest quality video connection.
Specifications and external appearance
are subject to change without advance
n o t i c e d u e t o c o n t i nu o u s p r o d u c t
improvement.
RTB1023
tV
tV
Need help?
Do you have a question about the RTB1023 and is the answer not in the manual?
Questions and answers