Using The Vcr Remote To Operate Hitachi Or Hughes Dss® Box; Remote Control Customer Controls - Hitachi VT-DX815A Owner's Manual

USING THE VCR REMOTE TO OPERATE HITACHI OR HUGHES
DSS® BOX
USING THE VCR REMOTE TO OPERATE HITACHI OR HUGHES DSS® BOX
The VCR remote control can be programmed to control Hitachi or Hughes.
When using a DSS® box other than these two brands, refer to the DSS®
box manual.
pic
1 Press and hold the "DSS" button.
pic
2 Press 1 or 2 button corrsponding to your DSS® box receiver ID
number as shown in the chart below.
or
DSS® box DSS® box
Brand receiver ID
number
DSS 1
Hitachi
DSS 2 2
DSS 1
Hughes
DSS 2 1

Remote Control Customer Controls

Remote Control Illustration pic
Item No. Name of the button Function
1 —
2 CLEAR/EXIT
3 DISP/INFO
4 DSS GUIDE
5 PAUSE/SELECT
6 DSS MENU
7 —
8 DSS
9 DSS/TV
Press
"DSS" and
this button
1
2
Transmission window
to clear the main menu from the display and will
return to the channel that was being viewed prior to
entering the menus.
to show the information about the program on the TV
screen.
to show the available program at a given time on
several different channels.
to show the program guide on the TV screen while
watching DSS video.
to show the main menu on the TV screen.
Cursor keys for DSS® box
to select DSS to control from three devices (VCR, TV,
DSS).
to select the DSS mode or the TV mode.
74