How To Use - Rival Snow Cone Maker Owner's Manual

HOW TO USE YOUR SNOW CONE MAKER
1. C lean all components prior to first use and assembly (see
HOW TO CLEAN YOUR SNOW CONE MAKER). Be sure that
the unit has been properly reassembled and the COVER is
attached correctly, or unit will not operate.
2. L ift the LID and place approximately 4-6 ice cubes into the
unit. Fill until ice level is approximately 1-inch away from
the opening of unit.
3. P lug power cord into outlet.
4. P lace a wide-mouth cup closely underneath the ICE CHUTE to
catch the shaved ice.
5. G ently press down on the LID near the position marked
"PUSH" to activate the motor and begin making shaved ice.
Make sure your cup is underneath the ICE CHUTE to catch the
shaved ice.
6. W hen your cup is full, stop pressing on the LID to stop the
motor. Lift the LID and refill the unit with ice to continue
making more snow cones.
7. C lean all excess ice/water from unit after use. (See HOW TO
CLEAN & ASSEMBLE YOUR SNOW CONE MAKER.)
-E6-
HOW TO USE YOUR SNOW CONE MAKER
NOTE: O ccasionally ice may build up and get lodged behind the
ICE CHUTE. If ice is not coming out of the chute, gently
shake the unit to ensure the ice is not frozen together.
CAUTION: D o not allow children to operate this appliance. The
Snow Cone Maker is for household use only. Do not
attempt to sharpen the BLADE.
-E7-