Recording; Normal Recording; Skipping Some Materials During Recording - Hitachi 19VR11B Owner's Manual

Hitachi owner's manual tv/vcr combination viewing and recording 19vr11b

Table of Contents

RECORDING

Make sure...

• Power must be turned on.

• Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast

forward the tape to the point at which you want to begin recording.)

• You must select the recording mode in STEREO, SAP or MONO when you record a

broadcast. Refer to "TO SELECT STEREO, SAP OR MONO MODE" on page 13.

You can only watch the same TV program that is being recorded.

1 Select the channel to be recorded

Press number buttons on the remote control or the CHANNEL

2 Select the tape speed

Press SPEED button to select the desired tape speed (SP/LP/SLP).

3 Begin recording

Press REC button. The REC indicator flashes.

4 Stop recording

Press STOP button when recording is completed.

Press PAUSE/STILL button to temporarily stop recording. The REC indicator blinks.

Press PAUSE/STILL or REC button to resume recording.

NOTES:

• To prevent tape damage, after five minutes, the TV/VCR will automatically return to the

Recording mode.

• When in the Pause/Still mode, a display showing 5 "n n n n " marks will appear on the screen. Each

"n n n n " mark represents one minute of Pause time. You may refer to this display for remaining pause

button.

Table of Contents