OPERATING INSTRUCTIONS IMPORT ANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS WARNING : To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. WARNING: The sole purpose of this product is for use as a pool water purifier/ionizer as described in this manual; any modification or other use will void the warranty.
Solar water purifier protects your pool against microorganisms by transforming your water into biologically healthy and algae-resistant mineral water. Using a safe and effective low power output, your Remington Solar water purifier acts as a trickle charger to generate ions from the sunlight –...
Page 4
ION TESTING The mineral electrode is made of a unique alloy of several metals, predominantly copper. Ion test strips will detect the presence of the copper ion, which determines if the water has an adequate level of protective minerals. The reagents in the kit are very sensitive, and readings can be affected by various interferences.
its normal level, or approximately .0.9. .The pH may now be in the range of 7.2-7.8. The Solar water purifier works well at higher pH values, so do not arbitrarily attempt to adjust the pH if it is within this recommended range. In general, use your Solar water purifier just enough to maintain an adequate ion level, and to determine how little chlorine is necessary to keep the water clear.
NOTES The diluted acid dip can also be used to clean the electrodes. Place the unit on top of the jar with the electrodes immersed and remove when the bubbling action stops. Do not leave electrodes submerged for more than a few minutes. Rinse and reinstall screen. ROUTINE MAINTENANCE It is important to spend a few minutes a week to monitor the water balance, clean the unit and to learn the trends.
Clean and remove electrode from the unit and store in an airtight plastic bag or jar. Store your Solar water purifier indoors. Avoid freezing. If the pool was shut down with an insufficient ion level, or severe conditions were encountered late in the off season, less than clear water conditions may be experienced.
functioning properly. If this occurs, contact Customer Service. 14. When replacing the mineral electrode, ensure that the threads are dry and free of water. 15. In hard water conditions, over time, the solar panel may form calcium deposits which are left by water evaporation. To quickly and easily remove the scale, apply diluted acid/water (as described under ‘ELECTRODE CLEANING’) with a toothbrush.
Need help?
Do you have a question about the Solar Pool Ionizer and Purifier and is the answer not in the manual?
Questions and answers