Motorola DCT5100 User Manual page 36

Connecting a TV, VCR, DVD, and A/V Receiver or Amplifier
This cable configuration may be used for a mono or stereo TV, because
the TV audio and video jacks are not used.
When using a mono VCR with this setup, a stereo audio cable with a
Y-cable adapter is needed to connect the mono VCR to the A/V receiver
or amplifier.
Please refer to the Audio and Video Options on the following page for
more information on this cable configuration.
1
Connect an RF coaxial cable to the cable wall outlet and the
CABLE IN
connector on the DCT5100.
2
Connect a stereo audio cable to the
on the DCT5100 and the
A/V receiver or amplifier.
3
Connect a video cable to the
VIDEO
and the
4
Connect a stereo audio cable to the
on the A/V receiver or amplifier and the
connectors on the DVD.
5
Connect a video cable to the
A/V receiver or amplifier and the
DVD.
6
Connect a stereo audio cable to the
connectors on the A/V receiver or amplifier and the
L
and connectors on the VCR.
7
Connect a video cable to the
receiver or amplifier and the
8
Connect a stereo audio cable to the
connectors on the A/V receiver or amplifier and the
L
and connectors on the VCR.
9
Connect a video cable to the
receiver or amplifier and the
10
Connect a video cable to the
A/V receiver or amplifier and the
VIDEO
VIDEO OUT
1 video connector on the A/V receiver or amplifier.
DVD VIDEO
VCR IN VIDEO
OUTPUT VIDEO
VCR OUT VIDEO
INPUT VIDEO
TV
29
DCT5100 User Guide
AUDIO OUT R
1 AUDIO R L
and
connector on the DCT5100
DVD AUDIO R
AUDIO OUT ANALOG R
connector on the
VIDEO OUT VIDEO
VCR IN AUDIO R
connector on the A/V
connector on the VCR.
VCR OUT AUDIO R
connector on the A/V
connector on the VCR.
MONITOR OUTPUT
/
INPUT VIDEO
connector on the TV.
L
and connectors
connectors on the
L
and connectors
and
connector on the
L
and
OUTPUT AUDIO R
L
and
INPUT AUDIO R
connector on the
L