Hama Wireless LAN Modem Router 54 Mbps Installation Instructions Manual page 11

00062774bda 28.06.2005 14:07 Uhr Seite 22
The picture above is of a 128 bit WEP encryption. This is only an example of a WEP code, please do not use it
This WLAN modem router supports the 64 bit and 128 bit WEP encryption.
64 bit 10 HEX symbol 0-9, A-F and a-f
128 bit 26 HEX symbol 0-9, A-F and a-f
You can set up to 4 WEP codes, only one of which can be used at a time. Please ensure that your codes are
entered identically in all other WLAN adapters in use.
Click Next to continue configuration.
In the next box (above), you can change your PPPoA connection so that it is different to Telekom's standard
one. You can proceed by clicking Next >.
Those whose DSL connection is from another provider may need to change these entries. To find out more,
contact your respective DSL connection provider.
In the last box is a summary of your configurations. Please check your entries through once again. It is very
important that you do this, as otherwise your Internet connection or WLAN network might not function pro-
perly. If you want to correct something, click -> Back. If not, close the router configuration by clicking -> Save
and Reboot.
The WLAN modem router will now restart. This can take up to a minute. Your new router is now ready for ope-
ration.
3. Integrated USB printer server set up
Before you begin installation, make sure that you have your printer driver ready to hand. If not, do not connect
your printer to the Hama WLAN modem router yet!
Place the enclosed driver CD-ROM for the 54 Mbps WLAN modem router into your drive. The following win-
dow opens automatically: If the window does not open automatically, switch to your CD-ROM drive and
double-click the file Install.exe.